Installation Guide
3
The correct use of the machine need the professional
authorized operator who must has got the appropriate
training and can understand the instruction manual of
the factory, familiar to the safety regulation and cannot
drink and smoke to avoid the influence on the
physiological and mental.
The following conditions are necessary:
- Read and understand the info and instruction in the
manual;
- completely know the characteristic and feature of the
machine;
- Keep the unauthorized person far from the operation
area;
- Secure the installation of the machine in accordance
with the relative standard and regulation;
- Secure all the machine operators have been trained
and can correctly and safety use the machine and
under the enough monitoring in the process of
operation.;
- Before confirm the power off, do not touch the cable or
motor or any part in the electrical equipment;
- Carefully read the manual and know how to correctly
and safely use the machine;
- Always refer to the manual.
-Do not remove or abrade any label of the warning and
instruction on the danger or replace the label missing or
fuzzy. You must get the label from your nearest dealer
if any label is missing or damaged.
-Check the use and the relative accident defensive
regulation of the standard and the high-voltage and
rotation parts.
- The manufacturer will not be responsible for the
damage and accident from the unauthorized changes
or modification.
In the work and maintenance, you should always tie up
the hair and do not wear the loosen clothing, necktie
and watch or the others can be gripped into the
movable parts.
Brief introduction of the wheel
balancer
Purpose of the design
This model of wheel balancer with the functions of CPU,
digital display and high performance is designed to
balance the car or van tire of 65kg. ALU mode makes
us balance the various appearances of the aluminum
alloy tire.
Meaning of the label (including
the indicated instruction)
Lightning
This label is at the rear of the machine to indicate that
there is the plug of the power cable and the operator
should care about the personal safety.
Rotation
part
This label is near the balance shaft and hint the
operator that this is a rotation part which is dangerous
and should not use your hand to touch it. The indication
of the arrow is the direction of the rotation.