Installation Guide
4
Weight calibration program
Press and Dis-/+ key to
enter SET UP.
Press to enter POS XXX,
use your hand to rotate the tire.
When the right display displays
110,At this
moment, press
,use your hand to rotate
the tire until it displays 120,at this
moment,
Press , the display will
display Add 0 to enter the self
calibration program. Start the
machine and lower the hood, tire
rotates. If without the hood, press
the start key to start. When the
tire stops rotation, the display will
display Add 100,use your hand
to rotate the tire until all the
outside indicating light lights up.
Use your hand to clip the
standard 100g weight at the
12clock position. Start the
machine. When stop , the display
will display 100 Add, Detach
the weight outside. Inside with
the same operation. Stop the
machine and it will beep for three
times indicating self-calibration
completed.
POS
110
100
ADD