Installation Guide

4
When balance
the car, please
press and
the car
balance mode
light.
SUPPLEMENTARY EXPLAINATION:
Once switching on, you will see standard dynamic
balance mode setup by the computer. When selecting
ALU mode and the configuration of the aluminum alloy
rim is similar to the above standard ALU1\ALU2\ALU3,
you can get relative accurate balance effect. If the
section of the tire similar to the one given be the
program, you need do some adjustment on the position
and weight of the weight. General speaking, 1~2 times
of adjustment can reach relative satisfactory balance
effect.
Error Hint
DISPLAY
REASON
SOLUTION
Err OPN
protective hood not
lower
not start the hood
function
Lower down protective
hood.
start the hood function
Err SP
rotation speed not
enough
Check belt and motor.
Err OFF
stop error
Press the start key or
raise the protective
hood.
Err FAC
factory setup error
Correctly execute the
factory setup.
Err
USR
customer setup error
Execute the customer
setup.
FIG 14