Installation Guide

１１
TP9KAC-TUX
Mar 2019-A
STEP 9: (Installing Swing Arms & Arm Restraints)
1. Install the swing arms on the carriages using the
included 1-1/2” swing arm pins.
Note: (Asymmetric Lifts – the short, asymmetric
swing arms are designed for front vehicle
placement, with the long, asymmetric arms for
rear vehicle placement.
2. Install arm restraint mechanisms to each swing arm, as shown below in (Fig. 13).
3. Check for proper engagement for the arm restraints as the gear rack should fully engage the gear on
the arm.
Fig. 13
SAFETY NOTICE!