Product Manual

TP12KFX

Feb 2017-B

STEP 8: (Installing / Routing HYDRAULIC HOSES, HYDRULIC FITTINGS & HOSE COVERS)

1. Install & connect hydraulic hoses, fittings and hose covers, as shown below in (Figs. 15-17) along with

the Exploded View #2 diagram on page 21.

NOTE: It is necessary to have hose routed through Hose Covers (Fig. 17), along with ensuring the

hydraulic 90 degree Fitting’s threads are fully tightened against the outside of Main column, as shown

in (Fig. 15 & 16).

Fig. 15 Fig. 16 Fig. 17

CAUTION! When routing the hydraulic hoses, make sure hoses & fittings are clear of any moving parts

STEP 9: (Installing Swing Arms, Floor Plate & Arm Restraints)

1. Install the Swing Arms on the carriages using the included swing arm pins to carriages, as shown below

2. Install Drive-Over Floor Plate between each column & secure to Base Plates with socket screws, as

shown below.