Product Manual

ALL ANCHOR BOLTS SHOULD ALWAYS BE TIGHT. Check the bolts periodically

and tighten if necessary to 60-90 ft.-lbs. after the bolts have been set at installation. If any

of the bolts do not function for any reason, the lift should be shut down until the bolt has

been replaced.

EVERY SIX (6) MONTHS:

1. Make a visual inspection of all moving parts for possible wear, interference or damage.

2. Check all pulleys for proper lubrication. If pulleys seem to be dragging during lifting

or lowering, lightly oil the axle.

3. Check and adjust as necessary, equalize tension to insure level lifting.

4. Check columns for plumbness.

5. Check fluid level of power unit.

6. Lube columns.