Product Manual

13
2. Position the swivel pads under the frame of the car at the proper lifting points.
(To find the proper lifting points, consult the vehicle’s service manual or other
approved publication.)
3. Push the up button and raise the lift until the swivel pads make contact with lifting
points.
4. Check all swivel pads to make certain all adapters are making full and proper
contact. NEVER go under a vehicle unless all adapters are in secure contact with
the vehicle.
5. Raise the vehicle approximately 2 feet and check the stability by rocking the
vehicle. Make sure vehicle weight is centered. Do not raise if weight is front or
tail heavy.
6. Raise the vehicle to the desired height and lower on the carriage latches. NEVER
go under a vehicle unless the carriage latches are engaged. If any heavy parts are
to be removed, use a set of high stands for added safety.
7. Before lowering, check the area under the vehicle to be sure it is clear. Raise lift
slightly, pull the Latch Release Handle and hold, then pull down on the lowering
release arm and lower SLOWLY. Keep feet clear.
8. After lowering, rotate the swing arms back out of the way.
MAINTENANCE SCHEDULE
DAILY
1. Always keep bolts tight.
2. Check for oil leaks.
MONTHLY:
1. Re-torque the anchor bolts if necessary. (See CAUTION! below)
2. Lubricate chains/cables with spray lubricant.
3. Check all connectors, bolts and pins to insure proper mounting.
4. Make a visual inspection of all hydraulic hoses and lines for possible wear or
interference.
!