Product Manual

Attaching the Air Actuator

1. Locate offside air cylinder and insert 6mm hose into PTC fitting.

2.Run air hose up and over top of column, running through top side of overhead beam

and down to main side lock assembly.

3.Connect air hose to provided PTC 3-way fitting, cut to size a piece of air hose and run

to main side air cylinder PTC fitting. Remaining hose will be connected from 3-way

fitting to palm actuated air release button valve.

4.Attach palm valve to steel bracket on side of column.

5.Connect shop air to palm valve. We recommend using leftover hose and NPT fitting

(not included).

Installing the Equaliz

er Cables

A. Manually lift both carriages to about waist height. Be sure they are the same height

and on the same latch location on the carriage.