Installation Guide

21
TC-950 & TC-950-WPA
July 2017
Fig. 41
Fig. 42
Fig. 43 Fig. 44
6.2.4 DETACH THE LOWER LIP: Use the disk to lift up the bottom section of the tire from the bottom of
the mouth (Fig. 41) and detach the lower lip (Fig. 42).
6.2.5 MOUNT TIRE: First, according to the steps in section (4.2.1 thru 4.2.3), install the lower lip and use
the press tool to press the lower lip as shown in Fig. 43. Rotate the turntable by about 90° then clamp and
apply the demount tool (Fig. 44) while continually rotating the turntable until the operation is complete, as
noted in section 6.2.5
CHAPTER 7 - TRANSPORTATION
It is highly recommended that the Tire Changer crate is transported by the forklift, once delivered. When
transporting an unopened Tire Changer machine, ensure to place forks according to the markings on the
outside of the crate packaging to reduce the possibility of damages.