Installation Guide

2
TC-950 & TC-950-WPA
July 2017
WARNING
This instruction manual is the important part of the product. Please read it carefully and keep it properly in order
to use it when maintain and examine the machine.
This machine is only applied to mount, demount and inflate the tire in the specified scope and not for any other
purpose.
The manufacturer will not be responsible for the damage or injury caused for the operation not properly and out
of the range.
NOTE: This machine should be operated by the special trained qualified personnel. When operating, the
unauthorized person will be kept far away from the machine.
Please note the safety label stuck on the machine.
Operators should wear safety protective facilities such as working suit, protective glasses, and earplug and
safety shoes. Keep your hands and body from the movable parts as possible as you can. Necklace, bracelet
and loosen clothing may cause dangerous to the operators.
Tire changer should be installed and fixed on the flat and solid floor. The more than 0.5m of distance from the
rear and lateral side of the machine to the wall can guarantee the perfect air flow and enough operation space.
Do not place the machine in the site of high temperature, high humidity, and dust and with flammable and
corrosion gas.
Without the permission from the manufacturer, any change on the machine parts will cause injury/damage to the
machine/operator.
Pay attention that the tire changer should be operated under the specified voltage and air pressure.
If you want to move the tire changer, you should under the guidance of the professional service personnel.