Installation Guide

6
CHAPTER Ⅰ BRIEF INTRODUCTION
1.1BRIEF INTRODUCTION
This series of equipment is the tire changer with fixed
column and rocker arm tire changer. It is suitable to
mount,demount and inflate all types of motorcycle tire
with tube & tubeless. The operation is easy, convenient,
safety and reliable. It is the necessary equipment for
the auto service shop and tire shop. The model is 806.
1.2EQUIPMENT OVERALL DIMENSION
1.3 TECHNICAL PARAMETER
Operational Pressure：8-10bar
Motor：50Hz ±1% 400V±1% 0.75kW
Turntable Rotation Speed：6rpm
Noise：＜75dB
Note: An over-voltage protection device is needed
for the connection with power supply
1.4 APPLICATION SCOPE
model max. wheel
diameter
max. wheel
width
rim diameter
（external
clamping）
806 960mm(37″) 254mm(10″)
6″～24″
1.5ENVIRONMENT REQUIREMENT
ambient temperature 5℃～45℃
relative humidity 50%@40°C -90%@20°C
sea level max.1000m
without dust and flammable and explosive gas
The operation space around the machine wills not
smaller then the indicated in FIG1
If the machine is installed outdoors, it must have the
protective shed to avoid being exploded to the rain and
sunlight.
It is forbidden to use in the site with the
flammable gas！
FIG1
CHAPTER Ⅱ CONFIGERATION AND
OPERATION
FIG2
1-vertical shaft spring 2 - rocker arm
3- hexangular shaft 4- demount tool
Model Height
（mm）
Length
（mm）
Width
（mm）
Net Weight
kg
806 1750 860 750 175