Installation Guide

2
Please note the safety label stuck on the machine.
Operators should wear safety protective facilities such as working suit, protective glasses, eye plug and safety
shoes. Keep your hands and body from the movable parts as possible as you can. Necklace, bracelet and loosen
clothing may cause dangerous to the operators.
Tire changer should be installed and fixed on the flat and solid floor. The more than 0.5m of distance from the rear
and lateral side of the machine to the wall can guarantee the perfect air flow and enough operation space.
Do not place the machine in the site of high temperature, high humidity, dust and with flammable and corrosion gas.
Without the permission from the manufacturer, any change on the machine parts will cause injury/damage to the
machine/operator.
Pay attention that the tire changer should be operated under the specified voltage and air pressure.
If you want to move the tire changer, you should under the guidance of the professional service personnel.
Notice: During opera tion, one operator is requi red for working on the w heel weighing belo w 25kg, two
operators required for the 25-50kg wheel, and wheel lifting equipment for wheels heavier than 50kg.
SAFTTY LABEL INSTRUCTION
Keep your hands far Carefully read operation When operation , wear
from tire when operation manual before operation the protective facilities