Installation Guide

13
hexangular shaft will vertically slide under the effect of
the weight of the hexangular shaft and return spring.
When the lock handle rotate clockwise for about 100
degree, the cam connected to the handle will push up
the lock plate to lock the hexangular shaft. If you can
not realize this situation, you can reach the target to
lock the hexangular shaft through adjusting the position
of the screws and nuts.（FIG 28）
FIG 26
FIG 27
FIG28
CHAPTER VI TRANSPORTATION
The machine must apply the original package to the
transportation and position
according to the indication on the package. The
transportation of the machine
must use the corresponding forklift（FIG 29）and the
stack should not exceed
3 layers.
figure
instruction
light up moist-proofing one layer gravity center hoist from here
1
FIG 29
STORE AND TRANSPORTATION
On the vertical surface, there are
corresponding identification to show the
basic requirement on the store and
transportation.
STORE IDENTIFICATION
STORE ENVIRONMENT
a.temperature：-5~+55°C；
b.humidity：≤ 90%；
c.Without cor rossive gas and keep away from
falmable and explosive objects and have
methods to protect rain and snow.：
d.In the process of transportation,meet the
basic requirement of the identification.