Installation Guide

FIG16

CHAPTER DEMOUNT AND MOUNT TIREⅣ

4.1 DEMOUNT TIRE

4.1.1 Deflate the air in the tire completely. Use the

special tool to detach the weight on the rim and pull out

the core (FIG17).

FIG 17

FIG 18

4.1.2 Place the tire between then bead breaking blade

and tire pressing runner clog (FIG 18).Then step down

the pedal to detach the rim from the tire. Repeat the

same operation on the other parts of the tire to make

the tire completely detached from the rim.

Place the wheel with the lip detached from the rim on

the turntable. Step the clamping pedal (FIG 2-10）to

clamp therim. You can select the internal and external

clamping according to the rim. When pressing the tire,

you should use the brush to spread the thick soap liquid

to lubricate the lip.

4.1.3Position the hexangular shaft (FIG 2-3) to the

working position to make the demount tool close to the

rim of the wheel. And use the hand wheel (FIG 7-2) to

push against the rocker arm and then use the lock

handle( FIG 2-17) TO LOCK. The demount tool will

automatically move a little of gap (FIG19).

The angle of the demount tool has been calibrated

according to the standard rim 13"）. If handling the

extra-big or extra-small rim, you can reposition.

FIG 19

FIG 20

4.1.4 Use the crowbar to detach until the lip to the

hump of the demount tool (FIG20). Step the turntable