Installation Guide

5
RAJ-6K-H & RAJ-6K-L
Oct. 2017
Air / Hydraulic Pump Diagram
Fig 2.
MAINTENANCE INSTRUCTIONS
WARNING! If you are not completely familiar with automotive lift maintenance procedure,
please contact your distributor for instructions before any practice.
TO AVOID PERSONAL INJURY, permit only qualified personnel to perform maintenance on this
equipment.
Daily:
• Inspect rolling jack rubber blocks for damage or excessive wear.
• Inspect hydraulic system for leaks.
• Inspect for loose bolts, broken/damaged components.
• Inspect linkages for damage, wear and tear.
• Inspect safety curtain guard for damage, wear and tear.
Monthly:
• Inspect the roller body assemblies.
Six Months
• Check fluid level in hydraulic reservoir.
Fluid Level Checking Procedure:
1. Completely lower rolling jack.
2. Wipe reservoir clean to prevent contamination of fluid.
3. Remove fill plug and check fluid level. Fill as required to bottom of fill hole with AW32 hydraulic
fluid. Take care to prevent contamination during filling operation.
4. Reinstall plug hand tight only.
NOTE: Repair / Replace as required with original equipment parts.
Air Fitting
/ Inlet Port
Press to Raise
Fitting / Hydraulic Hose
Press to L
ower