Product Manual

5
MSC-6KLP
Aug 2017
IMPORTANT!
Be sure to read the operating instructions before operating your lift!
Make sure you have made all necessary measurements to assure that your lift will fit in your shop /
garage and accommodate the car you intend to lift with it. Make sure you have enough clearance at
the top, and enough width to allow walking around. Also, be aware that the electrical power supply
requirements are 115 volt, 1 Phase, 20 amps.
Make sure you have someone to assist with installation as most of the lift components are big, heavy,
and cumbersome. The lift column alone weighs about 320 lbs. by itself. The base frame and swing
arms will each will weigh 200 lbs. apiece. It is possible for two people to install this lift if they have the
appropriate lifting and handling equipment, but it is definitely easier and faster if there are several
people available to help maneuver the components into place. As with any assembly involving big
heavy materials, safety considerations are a must. Though this lift is more difficult to install than some
other Lifts due to the single post design, once installed the lift design & features makes it extremely
effective for commercial shops and residential garages.
1.3 DESCRIPTION OF THE LIFTING SYSTEM
Fig. 2
power unit