Product Manual

MSC-6KLP

Aug 2017

STEP 8

Assemble the main side arm restraints for column side & swing arms to lifting frame. (Figs 26 & 27)

Fig. 26 Fig. 27

STEP 9

Attach latch release cable bracket to carriage (Fig. 28). Ensure latch release cable is routed thru hole

in bracket.

Fig. 28

STEP 10

Remove the plastic fill cap from the topside of the reservoir and fill the reservoir with approx. 12

quarts of Non-Detergent / Non-Foaming Hydraulic Oil - SAE-10, AW 32 or equivalent. Add hydraulic

oil to the fill line on the front side of reservoir tank.

STEP 11

Connect the power unit’s cord with plug w/ grounding pin to electrical 110-115VAC power source. If

an extension cord is required, ensure the proper gauge extension cord is used. If there is any

question on the power source requirements, please consult an electrician.

The MSC-6KLP Lift is now ready for Operation.

(See Operation Instructions in following Pages)