Full Product Manual

MR6.5K-38

Feb 2020

STEP 5: Air Tubing Connections for Safety Latches

A. Connect the Air Tube (6mm) to the Air Valve Switch located on side of Dolly Stand. (Fig. 7)

Fig. 7

STEP 6: Filling Reservoir Tank

A. Remove the black fill cap on reservoir tank and fill with 6 quarts of Non-Detergent / Non-

Foaming Hydraulic Oil - SAE-10, AW 32 or equivalent. Ensure not to fill past the MAX Fill Line

on the reservoir tank.

STEP 7: AC Power Supply Connection

A. Connect the 115VAC electrical power to the Power Unit’s three prong electrical plug. Ensure to

use proper size extension cord and plug type for 20 Amps (Fig 5.)

B. Ensure power supply incorporates 20 Amp breaker service for safety.

STEP 8: Lift Lubrication

A. Ensure to lubricate all sliding components with heavy duty white lithium bearing grease.

‘P’ is for compressed

Air Inlet Shop Supply

(90 - 125 PSI)

‘A’ is for connection

to the Air Cylinders

for Safety Latches