Full Product Manual

8
MR6.5K-38
Feb 2020
STEP 2: Assemble Power Unit Dolly
A. Locate Dolly components and assemble as shown in (Fig 3.) and in Exploded View section.
STEP 3: Attach Power Unit to Dolly
A. Remove Power Unit from the carton.
B. Use provided Nuts & Bolts to attach Power Unit to Dolly’s mount plate (Fig. 4).
Fig. 3 Fig. 4
STEP 4: Hydraulic Hose Connections
A. Connect short Hydraulic Hose to the pump’s output port, then to side of Valve Connector on
backside of Dolly Stand. (Fig. 5)
B. Connect both hydraulic hoses from lift cylinders to bottom side of Valve Connector (Fig. 6)
Fig. 5 Fig. 6