Full Product Manual

MR6.5K-38

Feb 2020

Lift Preparation

Lift must be fully lowered, and area clear of all personnel before a vehicle is put on the lift.

Loading Lift

Position the adapters at vehicle manufacturer’s recommended lift points. Use intermediate, high step, or

optional adapters for under body clearance when required.

Typical Lifting Points. Some vehicles may have the manufacturer’s Service Lift Point

locations identified by triangle shape marks on its under platform. Also, there may be a

label located on the right front door lock face showing specific vehicle lift points. If the

specific vehicle lift points are not identified, refer to vehicle’s operation manual or

consult the dealer. ALWAYS follow the operating instructions supplied with the lift.

To Raise Lift

1. Push UP / START button on power unit motor.

2. Raise lift until it touches the frame of the vehicle.

3. Check support adapters for secure contact at vehicle manufacturer’s recommended lift points.

4. Continue to raise to desired height, only if vehicle is secure on lift

5. Repeat complete spotting, loading and raising procedures, if required.

6. Push the power unit’s LOWERING VALVE LEVER to lower the vehicle to the locking position.

DO NOT go under Vehicle if locking latches are not engaged.

Before attempting to lift Pickup Trucks or other Truck Frame Vehicles, be sure that:

· Vehicle frame is strong enough to support its weight and has not been weakened by

modification or corrosion.

· Vehicle individual axle weight does not exceed one-half lift capacity.

· Adapters are in secure contact with frame at vehicle manufacturers recommended lift point.

· Vehicle is stable on lift.

To Lower Lift

1. Check all danger points of the lift and be sure that there are no objects or people in the working area

around the lift or on the lift.

2. In order to lower the lift to the required working height or to its lowest (or fully collapsed) position, First

raise the lift approx. 2" to clear the locking latches. Then push the air-valve button and when keeping it

be pressed, also push the LOWERING VALVE LEVER on the power unit.

3. Observe the complete lowering process.

4. When the lift is in its lowest position, remove the adaptor supports.

5. Carefully drive the vehicle off the lift.

Remain clear of lift when lowering vehicle. Observe pinch point warning decals.

If lift is not operating properly, DO NOT use until adjustment or repairs are made by

qualified lift service personnel.