Installation Guide

3
FP9K-DX-XLT
Jan 2019
OWNER / EMPLOYER RESPONSIBILITY
This is a vehicle lift installation/operation manual and no attempt is made or implied herein to instruct
the user in lifting methods particular to an individual application. Rather, the contents of this manual
are intended as a basis for operation and maintenance of the unit as it stands alone or as it is
intended and anticipated to be used in conjunction with other equipment.
Proper application of the equipment described herein is limited to the parameters detailed in the
specifications and the uses set forth in the descriptive passages. Any other proposed application of
this equipment should be documented and submitted in writing to the factory for examination. The
user assumes full responsibility for any equipment damage, personal injury, or alteration of the
equipment described in this manual or any subsequent damages.
LIFT SPECIFICATIONS
FP9K-DX-XLT Lift Specifications
Lifting Capacity 9,000 lbs.
Lifting Height 85”
Overall Length w/ Ramps 239”
Overall Length w/ no Ramps 197”
Overall Width 123”
Overall Width w/ Power Unit 134.5”
Approach Ramp Length 37”
Runway Tread Width 20”
Runway Length 188.5”
Runway Height 4.80”
Column Height 97”
Clearance between Columns 111.5”
Clearance between Runways 39.5”
Outside Runway to Outside Runway 79”
Clearance Under Runways 81”
Drive Thru Width 99”
Locking Positions 11
Lifting Speed 90S
Power 115V-20 Amp / 1PH
Ship Weight 2,354 lbs.