Product Manual

31
7.11.3. Unscrew the Door Closing Devise as far as it will go, but do
not move it to the side, this will allow the door to open
about ¾ of an inch.
7.11.4. Leave the Multi-purpose valve knob in the Exhaust / Dry
position.
7.11.5. Reset the Timer for drying, 20 – 30 minutes, the Dry Light
will come on indicating that Drying is active and the
Heating Elements are back on.
7.11.6. When the Timer reaches 0 min., the drying is complete and
the Dry Light and Heating Elements will turn off.
7.11.7. Unscrew the Door Closing Device, move it to the side and
open the door to remove the instruments.
7.11.8. Now turn the Multi-purpose valve knob to the “0” or off
position.
Warning
Multi-purpose valve knob should be turned in a clockwise direction
only.
7.12. At the end of the day, turn the ON / OFF rocker switch to the OFF
position.