2-DOOR LAUNDRY CABINET KIT OWNER’S MANUAL QL054 # 6725159
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warranty Claim Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty A thorough inspection must be made before installation and any damage must be promptly reported. We will not be liable for failures or damage that could have been discovered or avoided by proper inspection and testing prior to installation. We warrant this laundry cabinet, sink and components to be free from defects in materials or workmanship for one (1) year from the date of purchase.
Pre-Installation TOOLS/MATERIALS REQUIRED (NOT SUPPLIED) Adjustable wrench Needle nose pliers Phillips screwdriver Utility knife Pipe wrench Sealant Carpenter’s level Hacksaw Safety gloves Safety goggles Allen Key PARTS REQUIRED (NOT SUPPLIED) P-Trap # 6725159 Tail Pipe 4 Supply Lines
Pre-Installation (continued) PACKAGE CONTENTS B A C FRON T D E F G H J AA Part Description Quantity A Door Handles 2 B Cabinet Feet 4 C Cabinet Base 1 D Utility Sink 1 E Cabinet 1 F Strainer Basket 1 G Strainer Assembly 1 H Faucet Assembly 1 J Allen Key 1 AA Door Handle Screws 4 BB Base Screws 2 BB 5 Please contact 1-800-626-3525 for further assistance.
Installation BASE INSTALLATION DOOR HANDLE INSTALLATION A thorough inspection must be made before installation and any damages or missing parts must be promptly reported. Do not proceed with the installation. Do not dispose of packaging before you are satisfied with your new utility sink. 1. Insert the door hand screws (AA) into the pre-drilled holes on each door. 2. Attach the door handles (A) and hand tighten the door handle screws (AA). 3. Repeat on other door. 1.
Installation (continued) Faucet head FAUCET AND SPRAYER INSTALLATION Before installing, carefully unpack the faucet and ensure no parts are missing. 1. Insert the faucet shank, hose end and outlet through the holes of the base plate and sink accordingly. Faucet shank 2. From underneath, slide the rubber gasket and faucet shank nut over the end of the faucet shank, then tighten the faucet shank by hand until it is snug. Outlet Base plate 3. Connect the hose end to the outlet.
Installation (continued) MOUNTING THE UTILITY SINK 1. Carefully place a bead of sealant all around the top of the cabinet. SE AL AN T 2. Ease the sink onto the cabinet, and ensure it is placed evenly and centered on the cabinet. Wipe off any excess sealant. Use masking tape to hold the unit in place until the sealant dries. PLACEMENT Move the assembled unit to its final location. Final hook up of the supply lines and drain system can now be completed.
Care and Cleaning UTILITY SINK This utility sink is manufactured with premium ABS. With the proper care and maintenance it will provide you with many years of enjoyment. Do Do not -- Use common household cleaners (nonabrasive) or a mild liquid dish washing detergent. Rinse well and dry with a clean cloth. -- Do not allow your ABS surface to come into contact with products such as acetone (nail polish remover), nail polish, dry cleaning solution, lacquer thinners, gasoline, pine oil, etc.
Service Parts If you are missing parts or if you require replacement parts, please contact our customer service team at 1-800-626-3525, 8:30 am – 5 pm, EST, Monday–Friday. Identify the required part(s) and have the part number(s) ready.
Questions, problems, missing pieces? Before returning to the store, please contact Customer service from 8:30 am to 5 pm, EST, Monday - Friday 1-800-626-3525 Keep this manual for future use. Made in China Retain this manual for future use.
