Installation Instructions

Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
For Top-Mount Use Only
-9-
2. New Countertop Installation
- Please remove the false fronts (two small or one large
panel) please be careful not to damage the cabinet front.
- Apply painter's tape to the cabinet front, this will help
prevent damaging the surface when cutting out the
drawer fronts.
- If the cabinet has a center support (if you have two
smaller false fronts you will have a center support)
please remove it at this time. Cut along the bottom
even with the drawer opening making sure you
do not cut into the cabinet.
- Please remove the top rail, being careful not to cut
into the cabinet stiles.
1. Prepare the cabinet - New Countertop Installation
If needed shim along all sides
of the cabinet.
It is very important that you check to make sure
your countertop is compatible with this retrofit
apron front farm sink.
Your countertop thickness cannot exceed
1-1/2" (38mm)
Your countertop cannot overhang the cabinet
face more than 1-1/2 (38mm).
Your countertop must be fully supported by the cabinet.
If it is not please shim the countertop as needed. Ensure
the countertop is fully supported along the entire depth
of the cabinet.
- Install the countertop per the manufacturer's instructions
"
Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525, 8 a.m. to 5 p.m. EST Monday-Friday,
or send an email to [e-mail].