Installation Instructions

Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
For Top-Mount Use Only
-5-
- Cut out the paper template along the top mount
marked line.
- Cut out the diamond on the template; this will help
you line up the centerline; it should be in the center
of the diamond.
- Please put painter's tape to all exposed outside
edges prior to securing the template in place.
This will help prevent chipping when cutting.
- Put the template on the countertop. Line up the
template with the lines marked on the painter's
tape over the pre-existing hole.
- Mark the 2 notches from the template 1-15/16"
from the edge of the countertop.
- Tape the template in place.
- Trace the template on the applied painter's tape.
- Trace the notches at the front of the template.
- Remove the template
- Put painter's tape to the front of the countertop
to prevent chipping the laminate when cutting.
- Extend the marked lines down the front of the
countertop onto the painter's tape.
3. Trace the Template
Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525, 8 a.m. to 5 p.m. EST Monday-Friday,
or send an email to [e-mail].