Installation Instructions

Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
For Top-Mount Use Only
-4-
- Please remove the false fronts (two small or
one large panel) please be careful not to damage
the cabinet front.
- Apply painter's tape to the cabinet front, this will
help prevent damaging the surface when cutting
out the drawer fronts.
- If the cabinet has a center support (if you have two
smaller false fronts you will have a center support)
please remove it at this time. Cut along the bottom
even with the drawer opening making sure you
do not cut into the cabinet.
- Please remove the top rail, being careful not to
cut into the cabinet stiles.
1. Prepare the Cabinet - Replacement of an Existing Sink
2. Preparing Your Countertop
- Put the painter's tape at the centerline of the cabinet
from the backsplash to the front edge of the countertop.
- Put the painter's tape across the front edge of the
countertop along the entire width of the sink base
cabinet.
- Mark the centerline of the cabinet onto the painter's
tape.
If you have a New Countertop Installation please
refertopage9.
Centerline
Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525, 8 a.m. to 5 p.m. EST Monday-Friday,
or send an email to [e-mail].