Installation Instructions

Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions
For Top-Mount Use Only
-10-
4. Trace the Template
- Put the painter's tape at the centerline of the cabinet
from the backsplash to the front edge of the countertop.
- Put the painter's tape across the front edge of the
countertop along the entire width of the sink base
cabinet.
- Mark the centerline of the cabinet onto the painter's
tape.
3. Preparing Your Countertop
- Cut out the paper template along the Top Mount
marked line.
- Cut out the diamond on the template this will help you
line up the centerline, it should be in the center of the
diamond.
- Please put painter's tape to all exposed outside edges
prior to securing the template in place. This will prevent
chipping when cutting.
- Put the template on the countertop. Align the template
with the lines marked on the painter's tape.
- Mark the 2 notches from the template 1-15/16" from the
edge of the countertop.
- Tape the template in place.
- Trace the template on to the painter's tape.
- Trace the notches at the front of the template.
- Remove the template
- Put painter's tape to the front of the countertop to prevent
chipping the laminate when cutting.
- Extend the marked lines down the front of the countertop
onto the painter's tape.
Center line
Countertop
Overhang
Front of Cabinet
Have a question? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525, 8 a.m. to 5 p.m. EST Monday-Friday,
or send an email to [e-mail].