Farmhouse Ceramic Sink INSTALLATION INSTRUCTIONS
Tuscany Farmhouse Ceramic Sink INSTALLATION INSTRUCTIONS Top Mount 50/50 Double Bowl Sink High-grade fire-treated ceramic Dimensions: 37” x 19” x 8” Weight: 88lbs 3-1/2” Drain Opening SKU: 672-6501 MODEL: KS-01D • • • Read instructions thoroughly before starting Requires 2 people for installation Call or email technical support if additional help is needed: Tel: 832-804-8825 Email: info@KingmoreImports.com Recommended Tools: Pre-Install: Measure the exact dimensions of your sink.
Step 1: Mark 35-1/2in width to cut out on the bottom of the countertop *IMPORTANT* Due to the nature of ceramics, each sink dimensions may vary slightly. Make sure your physical sink width is wider than the cut countertop width of 35-1/2in. Step 2: Mark 15-1/8in depth (front to back) to cut out on the bottom of the countertop.
Step 3: For laminate countertops only, drill pilot holes in the two back corners of the countertop cut area, then use a saw to cut the countertop. For other countertop materials refer to your fabricat or manufacturer’s suggested cutting instructions.
Step 4: Apply silicone to all edges that sink touches the countertop. *IMPORTANT* To prevent water leaking into the countertop, sink must be installed with all three cut edges sealed with silicone. Silicone is not included.
Step 5: With 2 people using caution, carefully top mount the sink into precut countertop.
Step 6: Apply additional silicone to seal up all edges around the sink.
