Installation Instructions
Table Of Contents
- 页 1
- 书签7BBA500D FREE FALL One Handle Bathtub Shower Faucet
- 书签77388020 TUSCANY
- 书签E7EA3E61 Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft damp cloth. Avoid abrasive cleaners, steel wool, and harsh cleaners at these will dull the finish and void the warranty. Vinegar is suggested as an alternative cleaner and is safe for all finishes.
- 书签9F113C78 If soldering during the installation of this faucet, remove the seats, cartridges, and washers before adding any heat. The warranty will be voided on these parts if not removed before soldering.
- 书签3E7FB7FF Safety glasses should always be worn when cutting or soldering.
- 书签38823346 Always cover your drain before installation to prevent losing parts.
- 书签7E7D8597 ∙ Before installation turn off the cold and hot water shut offs. Turn the faucet handle\(s\) on to release the pressure in the system. ∙ Wrap ALL threaded connections with Teflon tape in a clockwise direction.
- 书签07B0EC86 For Skus : 673-7054, 673-7055 673-7056
- 书签0A9D520D Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 书签653FC674 Flashlight
- 书签B15A2FFD Safety Glasses
- 书签27F018F0 Groove Joint Pliers
- 书签4198B5DE Note: This faucet does not offer a Shower Only option.
- 页 2
- 书签8FA9C8EE Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 书签E5D01A84 35
- 书签A5E9EFE2 1
- 书签E05A8279 2
- 书签6C4AE8FC 3
- 书签EFF9839F 4
- 书签FC41CE84 5
- 书签0CAEFD52 6
- 书签ED00796F 7
- 书签0839E90C 8
- 书签FC7297BC 9
- 书签3AA47710 10
- 书签012545D5 11
- 书签2BB64C07 12
- 书签00421533 13
- 书签054EA91F 14
- 书签4875FC09 15
- 书签F7FC6467 16
- 书签AC2D65D8 17
- 书签69B0E36E 18
- 书签4E6FC85A 19
- 书签EFF8B46E 20
- 书签D27EF6F3 21
- 书签D44E5497 22
- 书签E8D40EB3 23
- 书签ABCA93AC 24
- 书签8F614462 25
- 书签FA991892 26
- 书签7FDCBF79 27
- 书签E7A7FDC7 32
- 书签2086A0BB 33
- 书签45A41FBE 34
- 书签91142CDD 36
- 书签F44C1EC9 37
- 书签9FFBFFA3 38
- 书签6B90C1B2 39
- 书签B3AA9CAA 40
- 书签02E6B4DD 41
- 书签F1046054 28
- 书签C770D644 29
- 书签240FE591 30
- 书签9DA8B7C7 31
- 书签59C795E5 42
- 书签7BBEFBAE 43
- 书签DD965F02 44
- 书签0F5ABE5F 45
- 书签2CE9BFE0 35
- 书签F2A3F2C4 46
- 书签A31E8BBE 47
- 书签0A794D33 28
- 书签20FAA1E6 29
- 书签913812C7 30
- 书签E778015A 31
- 书签AE3B5F27 42
- 书签45F84E40 43
- 书签3CD7A4D6 44
- 书签AC2BBB1A 47
- 书签085A5649 48
- 书签6DF409B7 Part Name
- 书签CE95E53A No.
- 书签8E9CF7CC 1
- 书签C608F7D8 Screws
- 书签BC29AD62 2
- 书签842E3403 Protective Sleeves
- 书签67F561B1 3
- 书签30845C38 Showerhead
- 书签F0E4521B 4
- 书签D0E68EEA Shower Arm
- 书签466DB28A 5
- 书签52BE1AE4 Shower Arm Flange
- 书签80BA750D 6
- 书签986EAF79 Connector
- 书签34145674 7
- 书签40049BB1 Diverter Seat
- 书签F1FDB9FE 8
- 书签7395E9DB O-ring
- 书签670C58BB 9
- 书签069DA90C Spring
- 书签09966E9F 10
- 书签EF623B9E Washer
- 书签17012621 11
- 书签A45D0B02 Divertor Core
- 书签55C0AFAF 12
- 书签B8E70945 O-ring
- 书签AC0879D3 13
- 书签0197A68D Divertor Spring
- 书签A2AF4087 14
- 书签3903B7B0 Washer
- 书签D4AAA97A 15
- 书签4F57704D Knob
- 书签7EA83043 16
- 书签A4A80DB0 Washer
- 书签661F3AC8 17
- 书签3738BE79 Trim Cap
- 书签B98794EE 18
- 书签AC96A5D0 Lock Nut
- 书签34447172 19
- 书签5F708932 Cartridge
- 书签0CFBB8D7 20
- 书签27F43EC5 Cartridge Housing
- 书签726E72EA 21
- 书签B41F73E1 Valve Body
- 书签659D6BA5 22
- 书签7D0DDD70 Handle
- 书签D2EF5A12 23
- 书签C2287D06 Set Screw
- 书签A122A324 24
- 书签F634853B Handle Button
- 书签B1DE5E3C 25
- 书签80404003 Escutcheon
- 书签856BD558 26
- 书签6A765378 Washer
- 书签8913F5E5 27
- 书签7F4AE760 Gasket
- 书签10B30168 28
- 书签DA17EB56 Adjuster Seat
- 书签E8984D16 Adjuster
- 书签4589347D Plaster Guard
- 书签8625987B Integral Stops
- 书签00897CD6 29
- 书签7DF840E5 Stop Valve Spring
- 书签CCB2358E 30
- 书签92302CA9 Stop Valve Core
- 书签E44301D3 31
- 书签20C36850 Sealing Washer
- 书签575FB9D7 32
- 书签F56DB24E Aerator
- 书签DD391A4E 33
- 书签045F80CD Spout
- 书签AD6D2BDC 34
- 书签A30FAF38 Set Screws
- 书签673ED5F2 35
- 书签6548BA2A O-rings
- 书签2413C0C3 36
- 书签E842256C Connector
- 书签FC3575C8 37
- 书签30382B90 Teflon Tape
- 书签3BBF94B9 38
- 书签4E28481E Handle Buttons
- 书签D63A9873 39
- 书签4F7DDCEE O-rings
- 书签02C30276 O-rings
- 书签20B445E8 O-ring
- 书签BBA9D2D4 40
- 书签1A7CF515 Screws
- 书签EFDA62D5 Screw
- 书签87EC840C 41
- 书签E37E4659 Allen Wrench
- 书签C3E47A3B 42
- 书签93404D8D 43
- 书签5977F16D 44
- 书签A6A262C2 46
- 书签B534F72A 47
- 书签A987E297 48
- 书签30E0675D 49
- 书签96525303 45
- 书签9E4DDD51 Diverter
- 书签86C84CDE Washer
- 书签3ACB3BE5 49
- 页 3
- 书签1D81A955 Step 1
- 书签D1877A0A 1. Note the minimum/maximum installation dimensions between the shower arm \(#4\), handle \(#22\), and spout \(#33\). Also note the hole size for the valve body: Traditional Installation must be 5" x 6". Thin Wall Mounting Installation must be 4" x 4". Note: Must install both showerhead \(#3\) and spout \(#33\) for proper operation of the faucet.
- 书签4D4798F0 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 书签0B607743 7-1/2" \(190mm\)
- 书签300D432A 5-15/16" \(150mm\)
- 书签1E7C018A Min1-5/8"-Max2-1/4" \(40mm-60mm\)
- 书签CC28FC8B 6-1/2" \(165mm\)
- 书签1E1A6853 3-1/8" \(79mm\)
- 书签165F861F Min 8"-Max 12" \(203mm-305mm\)
- 书签821E6701 1/2-14NPT
- 书签47558AC7 1/2-14NPT
- 书签14EDB6AF Recommended 74” \(1880mm\) Minimum From Floor To Showerhead, Or Greater As Desired
- 书签5C7F3FAC 7-7/16" \(190mm\)
- 书签E3469B9F 6" \(152mm\)
- 页 4
- 书签E059AB3F Installation Instructions
- 书签2479D280 4. Install an elbow at one end of the pipe. Install the other end to the tub spout diverter \(bottom hole of the valve body \(#21\)\). Install a nipple that will extend 1-5/8" - 3-1/8" from the finished wall. Note: Piping from the tub spout diverter \(bottom port of the valve body \(#21\)\) to the tub spout outlet must be either 1/2" nominal copper pipe or 1/2" iron pipe. Do NOT use PEX or PVC for the tub spout drop. Using the incorrect piping will cause leakage behind the wall or improper function of the spout.
- 书签0A323A58 4
- 书签919F0C30 Steps 2-4
- 书签2931DC80 2. If this is not a thin wall mounting, the plaster guard \(#46\) may be removed from the valve body \(#21\). Note: Secure the valve body \(#21\) to the support cross board for stability.
- 书签84655713 3. Apply Teflon tape to all pipe threads. Install an elbow at one end of the pipe. Install the other end to the shower diverter \(top hole of the valve body \(#21\)\). Secure the shower elbow to a 2x4 bracing.
- 书签40E51CAB Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 书签60D20CB1 21
- 书签EDCE8F3E 46
- 书签932B5BB6 21
- 书签E6260428 21
- 页 5
- 书签C7C8C73B Installation Instructions
- 书签99ECAAD5 5. Turn on the hot and cold water shut offs and check for leaks. If leaks occur, refer to steps 2 or 3. Turn on the faucet and let the water run for one minute. This will help clear any debris that may have come loose during installation and prevent the system from becoming clogged. Turn off the water. Note: Turn on both the hot and cold water shut offs before turning the faucet on. Not turning on both will cause your cartridge \(#19\) to become pressure locked. If this occurs, see the troubleshooting guide.
- 书签331C5F90 Steps 5-8
- 书签B5006AAF 7. Slide the spout \(#33\) over the nipple. Attach the spout \(#33\) to the nipple with set screw \(#34\), using large Allen wrench \(#41\). See the diagram for a visual.
- 书签7389A4F7 6. Slide the shower arm flange \(#5\) onto the longer end of the shower arm \(#4\). Wrap the threads of the longer end of the shower arm \(#4\) with Teflon tape and install to the shower drop. Wrap the threads in Teflon tape. Verify the washer \(#49\) is in place between the showerhead \(#24\) and the shower arm \(#4\). Install the showerhead \(#3\) onto the shower arm \(#4\).
- 书签D852F7A6 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 书签C1EDB481 8. Remove the protective sleeve \(#2\) from the plaster guard \(#46\) by twisting the protective sleeve \(#2\) counterclockwise. Note: Verify the handle adapter at the tip of the cartridge \(#19\) is securely attached to the cartridge \(#19\). If loose, locate the set screw \(bottom side of adapter\) and tighten the set screw with the provided Allen wrench \(#41\). If the set screw is not in the cartridge \(#19\), check the packaging or contact customer service.
- 书签348C0A04 19
- 书签9B9F4237 Handle Adapter
- 书签B285DB00 Set Screw
- 书签165C46F7 4
- 书签69C79356 5
- 书签B6F8BE74 49
- 书签0AD93D38 33
- 书签F2ADB844 34
- 书签594D8F42 41
- 书签DB34D916 38
- 书签9EE9ADF9 3
- 书签3125C131 2
- 书签0A3AB494 46
- 页 6
- 书签717E849D Installation Instructions
- 书签0996BA79 9. Temperature Limiting Device: Remove the trim cap \(#17\) and lock nut \(#18\). By default, the temperature limiting device is set to the highest temperature setting \(A\). In order to reduce the temperature, remove the temperature limiting device \(the red cap\) and turn the device clockwise to the desired temperature \(position B or C\). Reinstall the lock nut \(#18\) and trim cap \(#17\).
- 书签36075098 Steps 9-12
- 书签31687F3A Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 书签58C3B09A 25
- 书签7D08B9AE 16
- 书签8DA398C5 26
- 书签5525C6FF 27
- 书签5D7303C8 40
- 书签362C3C72 39
- 书签6D033168 15
- 书签6092E0D2 22
- 书签8F3D78CE 23
- 书签665EF000 24
- 书签21077C19 5
- 书签AAE7823F 4
- 书签D7512135 33
- 书签058B5A2B 40
- 书签6141860F 39
- 书签45BC8072 10. Verify the escutcheon gasket \(#27\), washer \(#16\), and washer \(#26\) are attached attched to the escutcheon \(#25\). Slide the escutcheon \(#25\) onto the cartridge \(#19\) and secure it with screw \(#40\) and O-ring \(#39\). Screw the trim cap \(#17\) onto the lock nut \(#18\). Note: Do not remove the customer service tag with the model number and phone number. This information will be needed when calling the customer service department.
- 书签3A44CD62 11. Slide the handle \(#22\) into the trim cap \(#17\), then use the screw \(#23\) to secure the handle \(#22\). Insert the handle button \(#24\). Next attach the knob \(#15\).See the diagram for a visual.
- 书签6E554164 12. Turn on the water and check for leaks. If a leak occurs from \(#4\) or \(#5\) in the diagram, repeat step 5. If a leak occurs from \(#33\), repeat step 6.
- 页 7
- 书签87F6B3B9 Troubleshooting
- 书签05F9C494 7
- 书签2A43F950 The lock nut \(#18\) has come loose or the O-ring on the cartridge \(#19\) is dirty or misaligned.
- 书签AAA67EBD The rubber valve seat at the base of the pressure balance cartridge \(#19\) is dirty or broken.
- 书签5DAD09E4 The cartridge \(#19\) is dirty, damaged, or pressure locked.
- 书签CD000A36 Turn off the water supplies. Turn on the handle \(#22\) to release the pressure, then close the handle \(#22\). Remove the handle button \(#24\), set screw \(#23\), handle \(#22\) and trim cap \(#17\). If the lock nut \(#18\) is loose tighten it. If the lock nut \(#18\) is tight, remove the lock nut \(#18\) and cartridge \(#19\). Verify the O-ring is clean and in proper alignment on the cartridge \(#19\). If the O-ring is dirty rinse it in warm water. Reinstall the O-ring onto the cartridge \(#19\). Reinstall the cartridge \(#19\), lock nut \(#18\), trim cap \(#17\), and handle \(#22\), set screw \(#23\) and handle button \(#24\). Turn the water supplies on.
- 书签211A4279 Turn off the water supplies. Turn on the handle \(#22\) to release the pressure, then close the handle \(#22\). Remove the handle button \(#24\), set screw \(23\), handle \(#22\) and trim cap \(#17\), lock nut \(#18\), and the cartridge \(#19\). Verify the rubber valve seat is damage free, clean, and in proper alignment on the cartridge \(#19\). If the rubber valve seat is damaged replace the cartridge \(#19\). If the rubber valve seat is dirty rinse in warm water. Reinstall the rubber valve seat onto the cartridge \(#19\). Reinstall the cartridge \(#19\), lock nut \(#18\), trim cap \(#17\), handle \(#22\), set screw \(#23\) and handle button \(#24\). Turn the water supplies on.
- 书签23B6356A Turn off the water supplies. Turn on the handle \(#22\) to release the pressure, then close the handle \(#22\). Remove the handle button \(#24\), set screw \(#23\), handle \(#22\), trim cap \(#17\), lock nut \(#18\), and cartridge \(#19\). Inspect the cartridge \(#19\) for dirt and damage. Replace the cartridge \(#19\) if damaged. Shake the cartridge \(#19\) and verify the pressure balance spool \(located at the bottom of the cartridge \(#19\)\) is moving freely \(clicks when shaken\). If the spool is not moving, tap it on your hand until it begins to click. If the cartridge \(#19\) is dirty, soak it in warm white vinegar for 4 hours. Every 30 minutes, while the cartridge \(#19\) is submerged in the vinegar, rotate the stem on and off 10 times. Reinstall the cartridge \(#19\), lock nut \(#18\), trim cap \(#17\), handle \(#22\), set screw \(#23\), and handle button \(#24\). Turn the water supplies on.
- 书签83EEBA92 Leaks underneath the handle \(#22\).
- 书签7851DED6 The water will not shut off completely.
- 书签49B82762 The water temperature cannot be adjusted or there is no hot or cold water.
- 书签017F30B1 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 书签2C2DC86C If the installation instructions have been followed carefully and the faucet still does not work properly, take these corrective steps. CAUTION: Faucets are under pressure. For safety, before preforming maintenance on the faucet always turn off the water at the water supply valve and turn on the handle\(s\) to release the pressure.
- 页 8
- 书签AEBBFFC7 The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original purchaser with original receipt only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation. Our responsibility under this warranty is limited only to the replacement of parts and no other costs. Should a malfunction occur within the time covered by this warranty, replacement parts may be obtained from Customer Service Department 1-800-626-3525 or email warranty@cmiproduct.com. The manufacturer will, at its discretion, provide replacement parts for installation by consumer for any parts that prove defective under normal usage and care with new or equivalent parts.
- 书签E239DFF9 Revised on 08/03/2021
- 书签7EF08147 8
- 书签515F2AC3 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
