Installation Instructions
Table Of Contents
- 页 1
- 书签AFCF9681 For Skus: 673-6217, 673-6218
- 书签EEB9C539 673-6259, 673-6260
- 书签B3F75AC3 FORDEN
- 书签0C65365A One Handle Lavatory Faucet, Easy-Clean Push Style Pop-Up drain with "Drain Shield"
- 书签9E657808 TUSCANY
- 书签F14D3D89 Flashlight
- 书签2F8EE9FE Safety Glasses
- 书签8E5FDCD0 Groove Joint Pliers
- 书签749BBBE1 Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft damp cloth. Avoid abrasive cleaners, steel wool, and harsh cleaners as these will dull the finish and void the warranty. Vinegar is suggested as an alternative cleaner and is safe for all finishes.
- 书签6D1A9749 If soldering during the installation of this faucet, remove the seats, cartridges, and washers before adding any heat. The warranty will be voided on these parts if not removed before soldering.
- 书签B117C3EF Safety glasses should always be worn when cutting or soldering.
- 书签61BC79A3 Always cover your drain before installation to prevent losing parts.
- 书签FE9DECB0 Before installation turn off the cold and hot water shut offs. Turn the faucet handle\(s\) on to release the pressure in the system. Before installing the water supply lines to the new faucet, turn on both water supply valves and bleed the water supply lines into a bucket for one minute to remove any debris that could clog the faucet. Wrap ALL threaded connections with Teflon tape in a clockwise direction. When installing the new faucet, turn the connectors finger tight, then use 2 adjustable wrenches \(using one to anchor the tube\) to tighten the connectors. Connections that are too tight will reduce the integrity of your system.
- 书签A285EFA1 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 页 2
- 书签5756903A Handle
- 书签47AFFDE6 Handle Button
- 书签D765CDAE Set Screw
- 书签FE9660CD Trim Cap
- 书签00B417A3 Lock Nut
- 书签1EEB3DF1 Cartridge
- 书签A1C79A19 Body
- 书签81471071 O-rings
- 书签927F9580 Mounting Bolt
- 书签F7665E09 Tube \(Hot\)
- 书签1D674659 Tube \(Cold\)
- 书签C816C83E Washer
- 书签2ED9D5D1 Aerator Core
- 书签194FD6F0 Aerator Collar
- 书签4938F7BB Screw
- 书签6D5FCE75 O-ring
- 书签CB6BF46E Deck Plate
- 书签D47CD697 Gasket
- 书签C387FF3C Lock Nut
- 书签CF22639A Metal Washer
- 书签2B3F3228 Allen Wrench
- 书签A6C8C78A Aerator Assembly
- 书签74E8B14F Aerator Wrench
- 书签1894825A Socket Wrench
- 书签25055F6C No.
- 书签77090E2D 1
- 书签44C583AF 2
- 书签43493FCB 3
- 书签C9ADA2D9 4
- 书签D0478190 5
- 书签5E6F488A 6
- 书签B55B3572 7
- 书签927D21CD 8
- 书签39BC8F7E 9
- 书签8978FCD4 10
- 书签5359D99E 11
- 书签5EE77168 12
- 书签DBAF6417 13
- 书签B0163714 14
- 书签41C9F152 15
- 书签E51BCA99 16
- 书签82D6FB57 17
- 书签4815FDC3 18
- 书签D0199663 19
- 书签CD2BF2C4 20
- 书签E51F079F 21
- 书签7D01D3FA 22
- 书签FCBB3819 23
- 书签A76178D8 24
- 书签1F1F95F0 25
- 书签BA6009B0 26
- 书签72D4C57C 27
- 书签7EF05BF7 28
- 书签EFFDE7D5 29
- 书签B55BE2F0 30
- 书签F434BAE1 31
- 书签F5A35922 32
- 书签0221966F Part Name
- 书签0C80B942 25
- 书签2E392335 1
- 书签BEBC5AB3 2
- 书签E52749F4 3
- 书签9C1B11FC 4
- 书签F197AA12 5
- 书签7FD5B802 6
- 书签100C963E 7
- 书签D14548D2 8
- 书签F665B829 9
- 书签DB9E2FDE 10
- 书签3E80D410 11
- 书签6D8AA250 12
- 书签D153B3D0 13
- 书签C4CCEAE7 14
- 书签6D8C9CC4 16
- 书签4A5F7F28 17
- 书签9F824587 18
- 书签D6141DDE 19
- 书签AEFC40A8 20
- 书签665D1E7B 21
- 书签C67AE60D 22
- 书签7172FECA 23
- 书签28E8CD94 24
- 书签68534DA6 15
- 书签F7F77309 Base
- 书签81BBBDFC Cover
- 书签FAB426A8 Washer
- 书签6880FBDB Stopper Core
- 书签B0F58C9A Stopper Housing
- 书签0FE3FEAF Small Washer
- 书签F9673A64 Large Washer
- 书签918556B7 Lock Nut
- 书签86F6733E 26
- 书签F54E234F 27
- 书签63F765D0 28
- 书签0DD40919 29
- 书签466DA84F 31
- 书签EA5699F7 30
- 书签650BA6AF 32
- 书签C043B6C9 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 页 3
- 书签C2FBB086 1. Turn off the water shut offs before installation. Remove the current faucet. Clean and dry the surface the new faucet will be installed on. Note: This faucet fits 3 cm/1-3/16" countertops.
- 书签BF7F65E6 20
- 书签C387C2E8 21
- 书签245A38FE 24
- 书签4A5FCA26 16
- 书签F2629B6E 17
- 书签CDC531F8 18
- 书签7564F8A2 7
- 书签1EE6C0D2 19
- 书签7AE9C6E3 Steps 1-4
- 书签C87136DC 2. Deck Plate \(3 Hole\) Installation: Verify the O-ring \(#16\) is in place. Attach the gasket \(#18\) to the deck plate \(#17\), ensuring the notches on the deck plate \(#17\) line up for proper installation. Apply silicone sealant beneath the gasket. Install the faucet through the second hole from the left. Note: Do not remove the customer service tag with the model number and phone number. This information will be needed when calling the customer service department.
- 书签89FFC99B 3.
- 书签2EF571BB Single Hole Installation: Verify the O-ring \(#16\) is in place. Apply silicone sealant beneath the base \(#14\). Install the faucet through the single faucet hole. Note: Do not remove the customer service tag with the model number and phone number. This information will be needed when calling the customer service department.
- 书签55638D65 4.
- 书签7E488969 From underneath the sink, slide the metal washer \(#21\) onto the mounting bolt \(#20\). Screw on the lock nut \(#19\), then tighten using the socket wrench \(#24\). Hint: Have someone hold the faucet body \(#7\) in place while tightening.
- 书签F0C34F90 16
- 书签38220689 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 页 4
- 书签A076958F Installation Instructions
- 书签A3587EEE Steps 5-9
- 书签FBC930C8 29
- 书签E5EC5AFA 30
- 书签F80380FB 29
- 书签F2699BF5 8. Remove the old drain assembly. Clean the surface to remove the old adhesive and dirt before installing the new drain. Dry the area thoroughly.
- 书签E626F257 26
- 书签D821E3E4 30
- 书签F20DCFDA 31
- 书签6F45C84A 32
- 书签19380146 7. Remove the lock nut \(#32\), large washer \(#31\), and small washer \(#30\) from the stopper housing \(#29\). Note: Before installation, verify there is no damage to the drain. If there is damage, call customer service for a replacement. Do NOT install damaged parts.
- 书签4C26C72A 9. Place a ring of silicone sealant around the small washer \(#30\) on the stopper housing \(#29\) or the drain opening of the sink. Insert the stopper housing \(#29\) into the drain hole from the top.
- 书签DB35243B 5. Apply Teflon tape onto the threads of the faucet water supplies in a clockwise direction. Tighten the water supply tubes/lines onto the water supply shut offs. Be sure to connect the cold water supply tube/line to the cold water supply valve \(typically on the right\) and the hot water supply tube/line to the hot water supply valve \(typically on the left\). Use a wrench \(as shown\) to tighten the nut. Hold the tubes/lines into a bucket and turn the water supply valves on for one minute. Turn off the water supply valves.
- 书签02C7DC24 6. Apply Teflon tape to the threads of the tubes \(#9 and #10\) in a clockwise direction. Slip 1/2" coupling nuts onto water supply tubes or use flexible stainless steel supply lines \(recommended\) - both are sold separately. Use two wrenches \(as shown\) to keep from twisting the supply tube off of the faucet when tightening the nut.
- 书签984B5AC4 9
- 书签7CFD4BB2 10
- 书签EECCEE20 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 页 5
- 书签4CB5F344 Installation Instructions
- 书签2646CB91 Steps 10-13
- 书签760E881E 12. Close the drain and fill the sink with water. Check for leaks. If water is leaking from the drain, refer to step 10 or 11 to tighten the areas leaking.
- 书签7EEF5B7F 11.
- 书签6AD788BC Use the aerator wrench \(#23\) to remove the aerator assembly \(#25\). Open the hot and cold shut offs and check for leaks. If a leak occurs, refer to step 6 or 7. Note: Do NOT use pliers to remove the aerator assembly \(#25\) as this may cause damage. Use the aerator wrench \(#23\) provided.
- 书签367A1A70 25
- 书签EFE5DAF7 11
- 书签BD05AEDF 12
- 书签93761EA4 13
- 书签F1D376F1 23
- 书签02339129 13.
- 书签19E3C284 Turn on both the hot and cold water and let it run for one minute. This will help clear any debris that may have come loose during installation and prevent the system from becoming clogged. Turn off the water and reinstall the aerator assembly \(#25\), using the aerator wrench \(#23\).
- 书签1ED43ED8 25
- 书签D820A78D 11
- 书签2991EBAF 12
- 书签F9E6D73D 13
- 书签05B6C2FF 29
- 书签505B9049 31
- 书签0AB16E11 32
- 书签0DE953A8 10. From underneath the sink, slide the large washer \(#31\) onto the stopper housing \(#29\), then screw on the lock nut \(#32\) hand tight. Do not over tighten. See the diagram for a visual.
- 书签86938E10 23
- 书签D2991380 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
- 页 6
- 书签CD381B8E Revised on 06/04/2021
- 书签2528F543 Release the pressure in the faucet system. Remove the handle button \(#2\), set screw \(#3\), handle \(#1\), and trim cap \(#4\). If the lock nut \(#5\) is loose tighten it. If the lock nut \(#5\) is tight, remove the lock nut \(#5\) and cartridge \(#6\). Verify the O-ring is clean and in proper alignment on the cartridge \(#6\). If the O-ring is dirty rinse in warm water. Reinstall the O-ring onto the cartridge \(#6\). Reinstall the cartridge \(#6\), lock nut \(#5\), trim cap \(#4\), handle \(#1\), set screw \(#3\) and handle button \(#2\). Turn the water supply valves on.
- 书签941188D6 The lock nut \(#5\) has come loose or the O-ring on the cartridge \(#6\) is dirty or misaligned.
- 书签EA5372A3 Dirty or damaged cartridge \(#6\).
- 书签EBBDAE67 Release the pressure in the faucet system. Remove the handle button \(#2\), set screw \(#3\), handle \(#1\), trim cap \(#4\), lock nut \(#5\), and cartridge \(#6\). Check the ceramic disk for dirt and damage. Replace the cartridge \(#6\) if damaged. If the cartridge \(#6\) is dirty, soak it in warm white vinegar for 4 hours. Every 30 minutes, while the cartridge \(#6\) is completely submerged, turn the stem on and off 10 times. Reinstall the cartridge \(#6\), lock nut \(#5\), trim cap \(#4\), handle \(#1\), set screw \(#3\), and handle button \(#2\). Turn the water supplies back on.
- 书签369C97EB The aerator assembly \(#25\) is dirty or misaligned.
- 书签5A510888 Remove the aerator assembly \(#25\), using the aerator wrench \(#23\) and check the washer \(#11\). If the washer \(#11\) is misaligned, realign the washer \(#11\) and reinstall. If the aerator assembly \(#25\) is dirty, soak it in warm white vinegar for 30 minutes. Reinstall or replace the aerator assembly \(#25\), using the aerator wrench \(#23\).
- 书签CA48A3D3 Troubleshooting
- 书签E077F2C7 Leaks underneath the handle \(#1\).
- 书签D94FADCE The water will not shut off completely.
- 书签B2A4C9CC The aerator assembly \(#25\) leaks or has an inconsistent water flow pattern.
- 书签BC840597 The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original purchaser with original receipt only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation. Our responsibility under this warranty is limited only to the replacement of parts and no other costs. Should a malfunction occur within the time covered by this warranty, replacement parts may be obtained from Customer Service Department 1-800-626-3525 or email warranty@cmiproduct.com. The manufacturer will, at its discretion, provide replacement parts for installation by consumer for any parts that prove defective under normal usage and care with new or equivalent parts.
- 书签AAAB73B0 If the installation instructions have been followed carefully and the faucet still does not work properly, take these corrective steps. CAUTION: Faucets are under pressure. For safety, before preforming maintenance on the faucet always turn off the water at the water supply valve and turn on the handle\(s\) to release the pressure.
- 书签80DAD5C2 Have a question? DON’T GO BACK TO THE STORE. WE CAN HELP. Just call 1-800-626-3525,8 a.m. to 5 p.m. EST Monday-Friday. Or send an email to Help@cmiproduct.com.
