Phau Ntawv Qhia

5. Repeat steps 2 and 3 to set the [HOUR] and
[MINUTE].
6. Repeat steps 2 and 3 to set the [UNIT].
7. After the unit is set,the LCD will display
“donE”first,then display all the settings you have
done and then it will turn o.
SETTING DATE, TIME AND MEASUREMENT UNIT
It is important to set the clock before using your blood
pressure monitor, so that a time stamp can be assigned
to each record that is stored in the memory. (The setting
range of the year :2018—2058 time format: 12H/24H)
1. When the monitor is o,
hold pressing “SET”
for 3 seconds to enter
the mode for year
setting.
Or when the monitor is o,
press “SET” button shortly,
it will display the time. Then
hold pressing “SET” button
to enter the mode for year
setting.
2. Press the “MEM” to
change the [YEAR].
Each press will increase the
numeral by one in a cycling
manner.
3. When you get the right
year, press “SET” to set
down and turn to next
step.Repeat steps 2 and
3 to set the [MONTH] and [DAY].
4. Repeat steps 2 and 3 to confirm the time format [12H] and
[24h].
7 I GB