SDS

- 2 -
4. FIRST AID MEASURES
EYE: Flush with water for 15 minutes. Get medical attention if effects persist.
SKIN: Remove contaminated clothing. Wash effected areas thoroughly with soap and water.
Launder clothing before re-use.
INHALATION: Remove to fresh air. Use artificial respiration and oxygen if needed.
INGESTION: Rinse mouth. Do not induce vomiting. Get prompt medical attention. Aspiration into
lungs can cause chemical pneumonitis which may be fatal.
5. FIRE FIGHTING MEASURES
FLASH POINT: (Seta Cl. Cup): >200°F (93
o
C) Explosive Limits: Lower: n/av Upper: n/av
EXTINGUISHING MEDIA: Water Spray, Alcohol Foam, Carbon Dioxide, Dry Chemical
SPECIAL FIRE FIGHTING PROCEDURES: Treat as flammable liquid / vapor fire. Keep un-ignited
containers cool with water. Vapors are heavier than air, may collect in low areas, and may travel to distant
source of ignition and flash back. Avoid flow of molten liquid into sewers. See section 8 for personal
protection.
6. ACCIDENTIAL RELEASE MEASURES
SPILL OR LEAK PROCEDURES: Remove all ignition sources and use spark proof equipment. Provide
good ventilation. Take up spills and put in closed containers. Avoid flow of molten material so sewers.
Floors may be slippery. See section 8 for personal protection.
7. HANDLING AND STORAGE
STORAGE TEMPERATURE (MIN./MAX.): 32 º F (0 º C)/120º F (49º C)
SHELF LIFE: 7 years minimum when the original container is kept tightly closed and properly stored.
SPECIAL SENSITIVITY: None.
HANDLING AND STORAGE PRECAUTIONS: Store in cool and ventilated places, but avoid freezing. Do
not store above 120ºF (49ºC).
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EYE PROTECTION REQUIREMENTS: Wear goggles. Have convenient eye wash stations.
SKIN PROTECTION REQUIREMENTS: Wear solvent resistant gloves and other clothing as
needed to prevent exposure.
RESPIRATOR/VENTILATION PROTECTION REQUIREMENTS: Provide sufficient ventilation to
avoid exposure levels above the established TLV.
INGESTION PROTECTION REQUIREMENTS: Avoid swallowing or sucking into lungs.
EXPOSURE LIMITS: Not established for product as whole.