SDS

Use adequate ventilation to keep exposure below recommended limits. Ensure that eye wash
station and safety shower are close to work station.
Hand Protection Equipment: Wear chemical resistant gloves and clothing to prevent skin
contact.
Eye Protection Equipment: Wear safety glasses or splash goggles to prevent eye contact.
Skin and Body Protection: Wear suitable protective clothing.
Respiration/Ventilation Protection Requirements: Provide good ventilation.
Ingestion Protection Requirements: Do not eat, drink or smoke while handling. Wash hands
with soap and water after handling. Launder all clothing and foot wear before re-use.
9. Physical And Chemical Properties:
9.1 Information of basic chemical and physical properties
Physical Form: Gas/Pressurized Liquid
Color: Clear Thin Liquid (Dispensed as white foam)
Odor: Typical solvent
Odor Threshold: not available
pH: not applicable – oil out emulsion
Melting Point/Freeze Point: 0°C (32°F) – Based on Water (liquid phase)
Initial Boiling Point: 100°C (212°F) – Based on Water (liquid phase)
Flash Point (Seta Closed Cup): not available
Flammability Limits: Explosive Limits: Upper: not available Lower: not available
Evaporation Rate: not available
Flammability Solid/Gas: not applicable
Vapor Pressure: not available
Vapor Density: not available
Specific Gravity: 1.000 (liquid phase)
Solubility in Water: insoluble
Auto Ignition Temperature: not available
Partition coefficient (n/octonol/water): not available
Viscosity: Water Thin (liquid phase)
9. 2 Other information
% NVM by Weight: 5.5%
% VOC Content (California): 37.5%
10. Stability and Reactivity:
10.1 Reactivity
Does not react under normal conditions
10.2 Chemical stability
Stable
10.3 Possibility of hazardous reactions
Does not react under normal conditions
10.4 Conditions to avoid
Heat and incompatible materials