Owner's Manual

Pairing the Headset to the Transmitter
7
In order to play audio, the X42 headset must be "paired" (linked) to its transmitter. The headset
and transmitter are paired out of the box. The instructions below are only necessary if pairing
appears to have been lost.
Step 1: Headset should be powered OFF. (Hold Power button for 3 seconds.)
Step 2: Press and hold the Pair button on the transmitter for 5 seconds until the
transmitter’s Power/Link LED flashes rapidly. Release.
Step 3: Press and hold the headset’s Power button for 6 seconds until you hear the
second double-beep, then release. The headset LED will flash rapidly (twice per second).
Step 4: Within 30 seconds, the transmitter Power/Link LED will remain on solid, and the
headset Power light will blink steadily once per second, indicating that pairing was
successful.
IMPORTANT!
2 feet
           
Maintain a distance of at least
2 feet between the headset
and transmitter when pairing.