User guide

Go to Table of Contents

Pairing the Headset and Transmitter

NOTE: Your STEALTH 500P Headset ships from the factory already paired for communication with

your Wireless Transmitter. In normal operation, it should not be necessary for you to pair the two

again. You should only need to perform pairing yourself in the event that wireless communication

fails. First check that the headset is powered on and is within range. If the Connection Status LED

on the Wireless Transmitter is still pulsing, the Wireless Transmitter can’t communicate with

the Headset. Perform the following pairing procedure.

3. Within 10 seconds, the Transmitter’s LED will remain on solid, and the Headset’s Power LED will blink steadily once

per second, indicating that pairing has been successful.

2.PressandholdthePowerButtonontheHeadsetuntiltheHeadset’sPowerLEDashesrapidly(5seconds),then 

release.

1. Start this process with the headset powered OFF. Press and hold the Pairing Button on the Transmitter until the

Transmitter’sPairingLEDashesrapidly(5seconds),thenrelease.(Useapapercliporsomethingsimilartopress

the Pinhole button)