User guide

Go to Table of Contents

Pairing the Headset and Transmitter

The STEALTH 500X Wireless Transmitter sends audio and chat between your game console and your

Headset via interference-free wireless. When the Headset and transmitter are communicating, the

Pairing LED on the Wireless Transmitter will stay lit.

NOTE: Your STEALTH 500X Headset ships from the factory already paired with your Wireless

Transmitter. In normal operation, it should not be necessary for you to pair the two again. You

should only need to perform pairing yourself in the event that wireless communication fails. First

check that the Headset is powered on and is within range. If the Pairing LED on the Wireless

Transmitter is still pulsing, the Wireless Transmitter can’t communicate with the Headset. Perform

the following pairing procedure.

2.PressandholdthePairButtonontheWirelessTransmitteruntilthetransmitter’sPairingLEDashesrapidly.

3. Press and hold the Power Button on the Headset until the Headset Battery/Pairing Status LED in the Power Button

 ashes.

4. Within 30 seconds, the Connection Status LED on the Transmitter will remain lit, while the Battery/Pairing Status

 LEDontheHeadsetwillashoncepersecondtoconrmthatpairingwassuccessful.

1.TheHeadsetshouldbepoweredOFF.Ifit’son,pressandholdthePowerButtonontherightearcupforve

seconds.

PAIR

PRESET +

SURROUND +

5 seconds

PAIR

PRESET +

SURROUND +

PRESET

SURROUND