Operation Manual

Using your XP510 Headset on Xbox 360

Xbox Wireless Settings

Your Turtle Beach XP510 headset is designed to work with Xbox 360 game consoles. For best performance, use with ofﬁcial

Microsoft® Xbox 360 controllers. In order to get ideal functionality from your headset, follow the directions below.

1. Turn on Xbox 360 Controller and plug the XBA into the controller’s headset jack.

2. Power on your headset.

3. Make sure that your headset’s Bluetooth is powered OFF: If the blue LED is blinking at all, hold the Bluetooth button

(or “BT MFB”) for 4 seconds to power off the Bluetooth. (The blue Bluetooth LED will not be lit when the Bluetooth is

powered off.)

4. With the XBA powered OFF (XBA LED off), press and hold the button on the XBA for 4 seconds and let go when the XBA

begins to blink rapidly. (Your XBA is now in pairing mode.)

5. Press and hold the Bluetooth button (BT MFB) on your headset until the LED blinks blue and red. (Your headset is now

in pairing mode, and a voice prompt in the headset will announce, “Pairing Bluetooth.”)

After a few seconds, the XBA and the headset will be paired, and a voice prompt will announce “Bluetooth paired.”

The headset’s Bluetooth LED will blink blue once per second, and the XBA will blink once per second, indicating

that they’re paired.

XBA LED

XBA Button

XBA Functions I Fonctions XBA

Function Button Press LED

Power ON Single 1 blink/sec

Power OFF Hold 3 secs OFF

Mic MUTE Double Solid ON

Mic UNMUTE Double 1 blink/sec

Pairing Mode

(paired)

(not paired)

Hold 4 secs Rapid blink

1 blink/sec

2 blinks/sec