User guide

Step 1:

Align the multi-pin ampliﬁer and headphone connectors as shown

and carefully insert them together, making sure not to force the pins.

Step 2:

Connect the four colored audio jacks to the corresponding inputs

and outputs on your sound card, as indicated in the table below:

Step 3:

Insert the USB connector into any USB port on your PC.

Step 4:

Select the microphone as the recording source in your sound

card’s control panel. Then adjust the volume level and sensitivity

for adequate response when speaking into the mic.

Step 5:

Set your sound card for 5.1 channel output and adjust the volume

settings to a comfortable level.

Sound Card Settings:

Most sound cards allow setting the output levels and speaker

conﬁgurations via software that is accessed from the Windows

Control Panel. Please refer to your sound card documentation

for instructions on setting up the outputs for 5.1 audio to properly

drive the headphone speakers. Also, note that some sound cards

may have the bass and center channels reversed, which will

cause an apparent decrease in bass response. This can often be

corrected with a setting in the sound card control software.

JACK COLOR

Center/Sub Orange

Mic Pink

Front Green

Surround Black