Instruction Manual

TurningPoint Cloud 101
NOTE
Select either duration or end time.
c
Select the message to be sent to participants from the Completed Test Message drop-down menu.
TIP
The default login options can be set in the preferences. For more information, see Self-Paced on
page 63.
5
Click OK.
At this time the participants may log into the test.
Next Steps
Now that participants have logged into the test, it is time to begin Self-Paced Polling on page 102.
Viewing the Compact Mode
For users who do not want to view the entire Self-Paced Polling application window, a compact view is available. Compact
mode displays the menu bar, polling icon and timer.
1
From the menu bar, click View and select Toggle Compact
Mode.
2
To return to full view, click View and select Toggle Compact
Mode.
Manually Setting a Timer
Test time limits may be set manually or changed if the time limit was incorrectly set.
1
From the menu bar, click Window and select Timer.
The Timer Options window opens.
2
Select one of the following options:
l Duration- Enter the hours and/or minutes for the
length of the test.
l End Time- Set a specific end time for the test.
l No Timer- The test will have no timer and polling
must be closed manually.
3
Click Set.
Polling
The Self-Paced Polling environment allows participants to take a paper-based test on a response device.
The Polling section covers:
Self-Paced Polling
Viewing the Live Results Monitor
turningtechnologies.com/user-guides