User Manual
AdjustIt 3 - Wall Mount 1
ADJUSTIT 3 WALL MOUNT
The AdjustIt3™ Wall Mount allows you to mount the DualBoard or Touch Board to a wall.
WARNING
It is recommended that a skilled professional assess the strength of the wall and determine the
appropriate hardware required to securely attach the AdjustIt 3 to the wall. A minimum of two people are
required to safely lift and mount the board to the wall.
What's in the Box?
(1) Central Structure (Wall Stand)
(1) Board Shelf
(1) Handle
(2) Brakes for DualBoard
(2) Brakes for Touch Board
Not pictured (10) M8x16 Screws
Not pictured (10) M8 Washers
Not pictured (2) M6 Washers
Not pictured (1) Hex Wrench
1
Remove the board shelf that is taped to the center vertical support from the central structure.
2
Attach the central structure to the wall.
3
Use four screws and four washers to attach the board shelf to the bottom of the central structure.
DONOTCOMPLETELYTIGHTEN.
turningtechnologies.com/user-guides