User Manual

ManualsBrandsTurnigy ManualsHobbyTX Controlled Relay Switch

G5V-2

Low Signal Relay

General-purpose, Low-cost,

Two-pole Relays for Signal Circults

•

General-purpose DIL terminal layout.

•

Wide switching power of 10

A to 2 A.

•

Fully-sealed type Relays standardized with bifurcated crossbar contacts. Highly

reliable in addition to its high environment resistance.

•

Conforms to FCC Part 68 (impulse withstand voltage of 1,500 V for 10 x 160 µs

between coil and contacts and between contacts of the same polarity).

•

High dielectric strength at 1,000 VAC between coil and contacts, and 750 VAC

between contacts of the same polarity.

•

UL and CSA standard approved.

■Model Number Legend

■Ordering Information

Note: When ordering, add the rated coil voltage to the model number.

■Characteristics

Note: The above values are initial values.

*1. The contact resistance was measured with 10 mA at 1 VDC with a voltage

drop method.

*2. The insulation resistance was measured with a 500 VDC megohmmeter

applied to the same parts as those used for checking the dielectric strength.

*3. This value was measured at a switching frequency of 120 operations/min

and the criterion of contact resistance is 50 Ω. This value may vary

depending on the switching frequency and operating environment.

Always double-check relay suitability under actual operating conditions.

■Ratings

●Coil

Note 1. The rated current and coil resistance are measured at a coil

temperature of 23°C with a tolerance of ±10%.

2.Operating characteristics are measured at a coil temperature of 23°C.

3. The maximum voltage is the highest voltage that can be imposed on the

relay coil.

●Contacts

RoHS Compliant

■Application Examples

• Telecommunication equipment

• Security equipment

G5V-@ -@

——

1. Number of Poles/ Contact form

2: 2-pole/DPDT (2c)

2. Classification

None: Standard

H1: High-sensitivity

Classification

Enclosure

rating

Contact

form

Te rm inal

shape

Model

Rated coil

voltage

Minimum

packing

unit

Standard

Fully

sealed

DPDT

(2c)

PCB

terminals

G5V-2

3 VDC

pcs/tube

5 VDC

6 VDC

9 VDC

12 VDC

24 VDC

48 VDC

High-

sensitivity

G5V-2-H1

5 VDC

12 VDC

24 VDC

48 VDC

Item Classification Standard High-sensitivity

Contact resistance *1 50 m

max. 100 m

max.

Operate time 7 ms max.

Release time 3 ms max.

Insulation resistance *2 1,000 M

min. (at 500 VDC)

Dielectric

strength

Between coil and

contacts

1,000 VAC, 50/60 Hz for 1 min

Between contacts

of the same polarity

750 VAC, 50/60 Hz

for 1 min

500 VAC, 50/60 Hz for

1min

Between contacts

of different polarity

1,000 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction

10 to 55 to 10 Hz, 0.75 mm single amplitude

(1.5 mm double amplitude)

Malfunction

10 to 55 to 10 Hz, 0.75 mm single amplitude

(1.5 mm double amplitude)

Shock

resistance

Destruction 1,000 m/s

Malfunction 200 m/s

100 m/s

Durability

Mechanical

15,000,000 operations min.

(at 36,000 operations/hr)

Electrical

100,000 operations

min. (at 1,800

operations/hr)

AC: 100,000 operations

min., DC: 300,000

operations min.

(at 1,800 operations/hr)

Failure rate (P level) (reference

value) *3

A at 10 m VDC

Ambient operating temperature

-25°C to 65°C

(with no icing or

condensation)

-25°C to 70°C

(with no icing or

condensation)

Ambient operating humidity 5% to 85%

Weight Approx. 5 g

Rated coil voltage

Example: G5V-2 3 VDC

Classification

Rated

voltage

Rated

current

(mA)

Coil

resistance

(Ω)

Must

operate

voltage

(V)

Must

release

voltage

(V)

Max.

voltage

(V)

Power

consumption

(mW)

% of rated voltage

Standard

3 VDC 166.7 18

75%

max.

min.

120%

(at 23°C)

Approx. 500

5 VDC 100 50

6 VDC 83.3 72

9 VDC 55.6 162

12 VDC 41.7 288

24 VDC 20.8 1,152

48 VDC 12 4,000 Approx. 580

High-

sensitivity

5 VDC 30 166.7

75%

max.

min.

180%

(at 23°C)

Approx. 150

12 VDC 12.5 960

24 VDC 8.33 2,880 Approx. 200

48 VDC 6.25 7,680

150%

(at 23°C)

Approx. 300

Classification Standard High-sensitivity

Load Resistive load

Contact type Bifurcated crossbar

Contact material Ag + Au-alloy

Rated load

0.5 A at 125 VAC;

2 A at 30 VDC

0.5 A at 125 VAC;

1 A at 24 VDC

Rated carry current 2 A

Max. switching voltage 125 VAC, 125 VDC

Max. switching current 2 A 1 A

Summary of content (4 pages)

PAGE 1
G5V-2 Low Signal Relay General-purpose, Low-cost, Two-pole Relays for Signal Circults • General-purpose DIL terminal layout. • Wide switching power of 10 μA to 2 A. • Fully-sealed type Relays standardized with bifurcated crossbar contacts. Highly reliable in addition to its high environment resistance. • Conforms to FCC Part 68 (impulse withstand voltage of 1,500 V for 10 x 160 µs between coil and contacts and between contacts of the same polarity).
PAGE 2
G5V-2 Low Signal Relay ■Engineering Data AC resistive load 1 5 3 AC resistive load 1 0.7 0.5 0.5 DC resistive load High-sensitivity/G5V-2-H1 100 Durability (x104 operations) 2 Switching current (A) Switching current (A) 5 ●Durability Standard/G5V-2 Durability (x104 operations) ●Maximum Switching Capacity Standard/G5V-2 High-sensitivity/G5V-2-H1 50 30 VDC resistive load 30 10 125 VAC resistive load 5 3 0 10 30 50 100 300 500 0.
PAGE 3
G5V-2 Low Signal Relay ●High-frequency Characteristics • Measurement Conditions G5V-2 HR 8502A Transmission reflection test-set RF R HP A 8501A Storage normalizer B 50Ω Terminator Note: The high-frequency characteristics data were measured using a dedicated circuit board and actual values will vary depending on the usage conditions. Check the characteristics of the actual equipment being used. Terminals which were not being measured were terminated with 50 Ω.
PAGE 4
G5V-2 Low Signal Relay - G 5 V 2 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.