User Manual

PRODUCT SPECIFICATIONS
The static thrust calculation
is
taken from
the
October
86 AMA
magazine,
air density
is
based
on
29.92
in Hg, and
propeller pitch
is not
used
in
this
calculation. Practical tests revealed very little
if any
change
in
thrust
due
to pitch variation
at the
same
RMP.
It
is
believed that this
is
partly
due to any
increase
in
thrust being negated
by blade stalling
and a
more turbulent influx area with increased pitch.
This obviously only applies
to
static conditions,
not
flying conditions.
PRODUCT SPECIFICATIONS
Max
input voltage:
60V
•Voltage measurement range:
2-8S
LiPo/LiFe/Lilon
Voltage display resolution: 0.001V
•Volt Port: 2.54mm pitch pins,
9
pins
Max
current:
100A
Shunt resistance^.001
ohm
Displayed resolution
A: 0.01
Temperature resolution:
1
Celsius
/1
Fahrenheit
PPM
signal output: 750uS
-
2150uS
Number
of
propeller measurable
: 1 to 5
Propeller rotating range: 1-60000RPM
Dimension: 95.3x72.8x21
5mm
Net
Weight:
85g
WARRANTY
AND SERVICE
We guarantee this product
to be
free
of
manufacturing
and
assembly
defects
for a
period
of one
year from
the
time
of
purchase.
The
warranty
only applies
to
material
or
operational defects, which
are
present
at the
time
of
purchase. During that period,
we
will repair
or
replace free
of
service charge
for
products deemed defective
due to
those causes.
You will
be
required
to
produce proof
of
purchase (invoice
or
receipt).
This warranty
is not
valid
for any
damage
or
subsequent damage
arising
as a
result
of
misuse, modification
or as a
result
of
failure
to
observe
the
procedures outlined
in
this manual.