User Manual

GS R/C

DLA ENGINE OPERATING-INSTRUCTION

MANUAL

08/20/2014 Copyrighted Material

Page - 9 DLA 32, 58, 64, 116, 116-I2 & 128cc Rev. A.05.01

Most aircraft manufactures will provide both Vertical and Horizontal alignment lines (V

c/l

and

c/l)

on the firewall. The template has corresponding V

c/l

and H

c/l

lines which are aligned to those

scribed on the firewall to accurately locate mounting hole. A paper mounting guide is provided at

the end of this operation manual, but is not as accurate.

Laser Cut Template is available through Golden Skies R/C Aircraft, Inc.

www.goldenskiesrc.com

PN: 03180-50005-A ($9.99)

DRILL BIT GUIDE – (for Propeller Bolts)

Specifically engineered Drill Bit Guides (DBG) for each DLA Engine are the preferred and most

accurate method for locating and drilling the holes in the propeller hub for the Propeller Bolts.