User Manual

5.Battery charging notes

If you are using a nickel-cadmium, nickel-metal hydride batteries for

recharging, please use our company dedicated charger. If the electrical current

is too large and it may lead to temperature over-heated and cause fire burning

accident. Please cut off the power supply immediately after recharging. Please

take out the battery from the transmitter when you are not using it within a

period, it is because the battery may damage the aircraft batteries, thus being

exposed.。

Transmitter charger:

1. Install the battery to transmitter with correct direction, and cover it.

2. Connect the charger to the main connector.

3. Connect the charger to the transmitter

Connector.

4. Cut off the power supply immediately after

Recharge completed.

If your transmitter, receiver using a nickel-cadmium, nickel-metal hydride

rechargeable battery, you have to well-check before you fly. If lack of

electricity, it could happen those phenomenon like inadequate control or out of

control, resulting accident. So please charge immediately when low in battery.

Receiver charger:

1. Connect the charger to the main connector.

2. Connect the Rechargeable receiver with battery charger

3. Recharge completed, cut off the power supply immediately.

2. 4G 6 Channel remote system

FS-CT6A

Model:

Notes