User Manual

2. 4G 6 Channel remote system

FS-CT6A

Model:

Notes

Left click the 'ARF' button on the interface, the screen on the right

will appear, this function is use for the swash plate adjustment of

CCPM function helicopter, to have a better control.

CH1\CH2\CH4 are allowed to adjust Individual, Adjusted value from

0% to 100%. Number can be directly entered from the keyboard.

Click 'ok' button to finish the adjustment.

function is use for the programmable mixed control function, it offers

some special function.

This system offers three individual mixed control

function(MIX1/MIX2/MIX3)

Source: mixed control source select.

Des: destination select

Up rate: upper part's mixed control ratio (-100%to100%)

Down rate: lower part's mixed control ratio (-100%to100%)

Switch: Activation ways (OFF.ON.SWA.SWB)

Click 'ok' button to finish the adjustment.

Left click the 'SWITCH A' or 'SWITCH B' button on the interface, the

screen on the right will appear, this function is use for correspond

function select setting of switch A and switch B. following are the

choice of content:

NULL.DR.NORID.THRO.CUT.

Click 'ok' button to finish the adjustment.

Left click the 'VR (A)' or 'VR (B)' button on the interface, the screen

on the right will appear, this function is use for correspond function

select setting of both Potentiometers, following are the content

setting:

NULL.PITH ADJUST.

Click 'ok' button to finish the adjustment.

13. 03 Switch and Potentiometers settings