User Manual

2. 4G 6 Channel remote system
13
FS-CT6A
Model:
Notes
Left click the ‘SAVE’ button on the interface, the screen on the right
will appear, this function is for save all your settings. in theory, you
can set up numerous types and save.
You can give it a name, and left click the ‘save’ button to save.
Left click the ‘OPEN’ button on the main interface, the screen on the
right will appear, this system function is for the parameters setting.
Left click the ‘save’ button after select finished.
Left click the 'ENDPOINT’ button on the interface, the screen on the
right will appear, this function is use for adjust the movement of
server to a suitable angel for a better control.
Each server are allowed to adjust Individual, it has two parts: left half
part and right half part. Adjusted value from 0% to 100%, the number
can be directly enter from the keyboard.
Left click the 'ok' button to finish the adjustment.
Left click the 'cancel' button to restore.
Left click the 'REVERSE’ button on the interface, the screen on the
right will appear, this function is use for change the direction of server
movement, it keeps the transmitter control direction correspond to the
server.
Left click the channel you want to change.
Click 'ok' button to finish the adjustment.
Left click the 'SUBTRIM’ button on the interface, the screen on the
right will appear, this function is use for adjustment for single server
for a better control, improve the yarage of model.
Each server are allowed to adjust Individual, Adjusted value from -
120 to 120. Number can be directly entered from the keyboard.
Click 'ok' button to finish the adjustment.
13. 02 System function settings