6 CHANNEL RADIO CONTROL SYSTEM INSTRUCTION MANUAL MODEL:FS- CT6A Digital propotional radio control system Http:www.flyskychina. com Copy right 2007@ flysky co.
Notes Model: FS-CT6A 2.4G 6 Channel remote system Menu 1.Introduction..................................2 2.Services.....................................2 3. The special symbols.... ....... ...... ....... ...3 4.safty guides..................................3 5.Power charging...............................4 6.Transmitter parameters.........................5 7.Receiver parameters...........................5 8..Each part of the transmitter.....................6 9.Receiver and server connectivity......... ..
Notes Model: FS-CT6A 2.4G 6 Channel remote system 1.Introduction Thank you for choosing 2.4 G ratio remote control digital products, if you are the first time to use this type of products, please read this statement carefully and strictly in accordance with the requirements of operation. You could refer to the Manual if you meet any problems during the operation . Please well keep the manual after use because you might have to use it again next time.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 3.The special symbols Please pay attention to the following symbols when it appears on the manual, and read carefully. If the oper at or does not oper at e by fol low ing the inst ruct ions, Danger:the oper at or may lead to ser ious inj ur ies, even Mor tal dang er. If the operator does not operate by following the instructions, Warning: the operator may lead to serious injuries, even Mortal danger.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 5.Battery charging notes If your transmitter, receiver using a nickel-cadmium, nickel-metal hydride rechargeable battery, you have to well-check before you fly. If lack of electricity, it could happen those phenomenon like inadequate control or out of control, resulting accident. So please charge immediately when low in battery. If you are using a nickel-cadmium, nickel-metal hydride batteries for recharging, please use our company dedicated charger.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 6.Transmitter parameters *Channels：6 *Charger port: Yes *Frequency band: 2.4GHz *Simulator port: PS-2 *Power resource：1.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 8.Each part of the transmitter Antenna Handle Switch B Switch A Pit Trim HOV.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 9.Receiver and server connectivity CH1 Ch2 Ch3 Ch4 Ch5 Ch6 Battery Main receiver Receiver Module When installing the receiver please make sure that two items showed 90 degree angle.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 10.2.4G Operation notes This is 2.4 G Frequency model products make of automatic address code.It use digital transmission mode, and this prevent outside interference effective active and passive. 10.01 Matching (code) Our products are well matched in the factory, you do not need to match by yourself. But if your are going to match the receiver with other transmitter, please follow the following steps: 1. Install the battery to 2.
Notes Model: FS-CT6A 2.4G 6 Channel remote system Boot Rx power ON Tx power ON 10.03 Shut down： 1. Cut off the receiver power supply. 2. Cut off the transmitter power supply.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 11.Computer hardware connection steps When you buy the CT6 series remote systems, with a programming line you can set up the program by your own, this will bring you happiness. You have to follow the following steps when you process the program setup: 1. Install the battery to the transmitter and switch on the power. 2. Plug in the programming line to the transmitter port. 3. Plug in the other head of programming line to computer. 4.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 12. Computer software installation FS-CT6A use the new computer programmable model design, every function of transmitter can be setup by computer. It makes you enjoy the fun of high-tech models. 12.01 PC software download: You can download from our website ： WWW.FLYSKYCHINA.COM 12.02 PC software installation: 1. Install driver software：FS- CT6DRIVER001. EXE 2.Install application software：FS-CT6SOFTWARE.EXE 3.Restare computer. 4.Installation completed.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 13.Transmitter function notes（Heli） Connect the transmitter programming line with pc, switch on the transmitter and application software. If you choose these types of heli（HELI90、HELI120、HELI140) the following interface will appear： Channel output display System function option System function setting Switch program setting 13.01 System function option: GETUSER:Import the transmitter data to pc.
Notes Model: FS-CT6A 2.4G 6 Channel remote system Left click the ‘SAVE’ button on the interface, the screen on the right will appear, this function is for save all your settings. in theory, you can set up numerous types and save. You can give it a name, and left click the ‘save’ button to save. Left click the ‘OPEN’ button on the main interface, the screen on the right will appear, this system function is for the parameters setting. Left click the ‘save’ button after select finished. 13.
Notes Model: FS-CT6A 2.4G 6 Channel remote system Left click the 'DR' button on the interface, the screen on the right will appear, this function is use for Double ratio control of CH1\CH2\CH4 channel. It gives you the best control of the model. This function offer the great help to beginner. CH1\CH2\CH4 are allowed to adjust Individual, Adjusted value from 0% to 100%. Number can be directly entered from the keyboard. This function will only take effect when the 'DR' button is switch on.
Notes Model: FS-CT6A 2.4G 6 Channel remote system Left click the 'ARF' button on the interface, the screen on the right will appear, this function is use for the swash plate adjustment of CCPM function helicopter, to have a better control. CH1\CH2\CH4 are allowed to adjust Individual, Adjusted value from 0% to 100%. Number can be directly entered from the keyboard. Click 'ok' button to finish the adjustment. function is use for the programmable mixed control function, it offers some special function.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 14.Transmitter function notes（Plane） Connect the transmitter programming line with PC, switch on the transmitter and PC software. When you select Fixed-wing aircraft (ACRO), the following interface will appear: Channel output display System function option System function option Switch program setting 14.01 System funciton option GETUSER:Import the transmitter data to pc.
Notes Model: FS-CT6A 2.4G 6 Channel remote system Left click the ‘SAVE’ button on the interface, the screen on the right will appear, this function is for save all your settings. in theory, you can set up numerous types and save. You can give it a name, and left click the ‘save’ button to save. Left click the ‘OPEN’ button on the main interface, the screen on the right will appear, this system function is for the parameters setting. Left click the ‘save’ button after select finished. 13.
Notes Model: FS-CT6A 2.4G 6 Channel remote system Left click the 'DR' button on the interface, the screen on the right will appear, this function is use for Double ratio control of CH1\CH2\CH4 channel. It gives you the best control of the model. This function offer the great help to beginner. CH1\CH2\CH4 are allowed to adjust Individual, Adjusted value from 0% to 100%. Number can be directly entered from the keyboard. This function will only take effect when the 'DR' button is switch on.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 15.Professional terminology AIL:副翼 ELE:升降舵 THR:油门 RUD:方向舵 GEAR: PITCH:螺距 FM:调频 PPM:脉冲相位编码 PCM:脉冲数据编码 MODULE:调制 RF:射频 DR:双重比率 TRAINER:教练 STICK:操纵杆 NULL:无功能 REV:反向 NOR:一般 TRIM:微调 SUB.
Notes Model: FS-CT6A 2.4G 6 Channel remote system 16.Packaging with content list NO: 1 2 Model 6 cha nn el 2.4G tran smitter （FS -CT6A ) 6 channel 2.
Http: www. flyskychina.com Copy right 2007@ flysky co.
