User Manual

Conrad Electronic SE · Klaus-Conrad-Str.1 · 92240 Hirschau
★ Don’t contact Ni-Zn batteries with water, sea water or other oxidation reagents, which will cause
rustiness and heat. If batteries get rusty, explosive decompression valve won’t work and will lead to
explosion.
★ Don’t over-charge Ni-Zn batteries, that is, don’t continually charge Ni-Zn batteries despite the designed
charging time. If the Ni-Zn batteries are not fully charged within the designed charging time, please stop
to charge. The delay of charging time will lead to leakage, heat and explosion.
★ It is forbidden for more than 20 pcs batteries in series. Because it will result in leakage, getting shock or
giving off heat.
★ Don’t disassemble the Ni-Zn battery, as it will result in short-circuit, leakage, giving off heat, catching
fire and explosion.
★ Don’t use the Ni-Zn batteries when they are leakage, any color deterioration, distortion or other changes
are found. Otherwise it will get hot, catching fire or explosion may happen.
★ Please keep the Ni-Zn batteries and other electronic products related to Ni-Zn battery away from baby,
children, to avoid accident of swallowing of Ni-Zn battery. If there is any accident, please go to doctor’s.
★ To use new Ni-Zn battery when the working time of the battery is far short from the initial working time,
as the cycle life of this Ni-Zn battery is finished.
8. Others:
8-1. Conrad Electronic SE reserve right to revise the specification without notification;
8-2. Anything not mentioned in this specifications, customer and Conrad Electronic SE should discuss to
get a solution;
8-3. Conrad Electronic SE does not undertake any responsibility for the accidents caused by actions not
matching with specifications.