User Manual
PRODUCT SKU DESCRIPTION LINKS
17808
20384
N300.1S.35
http://www.hobbyki-
ng.com/hobbyking/-
store/uh_viewItem.asp?id-
Product=10980
http://www.hobbyki-
ng.com/hobbyking/-
store/uh_viewItem.asp?id-
Product=20384
http://www.hobbyki-
ng.com/hobbyking/-
store/uh_viewItem.asp?id-
Product=20385
http://www.hobbyki-
ng.com/hobbyking/-
store/uh_viewItem.asp?id-
Product=24920
http://www.hobbyki-
ng.com/hobbyking/-
store/uh_viewItem.asp?id-
Product=26736
Turnigy nano-tech 300mah 1S 35c Lipo Pack
(Suits FBL100 and Blade mCPx)
9210000001
Turnigy nano-tech 300mah 1S 35~70C Lipo Pack
(Fits Nine Eagles Solo-Pro 100)
20385 9210000002
Turnigy nano-tech 600mah 1S 35~70C Lipo Pack
(Fits Nine Eagles Solo Pro 328, Eflite MQX, 120SR)
24920
9210000070
Turnigy nano-tech 260mAh 1S 35-70C Lipo Pack
(QR Ladybird/Genius CP/Mini CP)
26736 9210000080
Turnigy nano-tech 300mah 1S 45C Lipo Pack
(Suits FBL100 and Blade mCPx)
Preset Constant Charging Current
Connector
Charging Current
JST-XH
240mA
E-flite / MCP-X
500mA
Walkera
420mA
Molex
500mA
JST
900mA
Charging Instructions
1.Connect one or two 3S 11.1V 2200mAh or larger batteries to the Bat1 or Bat2 input source ports.
2.Press power key to turn On unit. Bat LED will turn on for selected input port, as will the circuit Status LED. Status LED will be solid green.
3. Standby LEDs of all charging ports will be solid green, and Charging LEDs will blink red to indicate no battery is attached.
4. During charge sequence, the charging LED is lit solid red and Standby LED is turned off. Once charging has completed, the Charging LED
will turn off and Standby LED will be solid green.
5. Two USB power source ports provide up to 5W (5V with 1A current) power for each port
6. When the 3S Lipo input supply battery drops below 11.0V, it will beep with LED battery LED flashing accordingly to alert you to take
required action. It will automatically turned off when input battery reaches 10.5V
7. To turn off the charger, press the toggle power key for 4 seconds. The unit will be turn off with a long beep alert.
8. Disconnect all batteries when charging is completed. Recommend disconnecting input battery even if charger is in the Off setting.
2