User Manual

ManualsBrandsTurnigy ManualsHobbyLED & Car Engine Sound System

Thank you for purchasing the TURNIGY LED + CAR ENGINE SOUND

SIMULATOR. This System has improved sound synthesis and a highly efficient

amplifier. When used with the included loudspeaker unit the sound system is

capable of producing an impressive range of realistic sounds.

Please read this manual carefully before use and keep for future reference.

Summary of content (8 pages)

PAGE 1
Thank you for purchasing the TURNIGY LED + CAR ENGINE SOUND SIMULATOR. This System has improved sound synthesis and a highly efficient amplifier. When used with the included loudspeaker unit the sound system is capable of producing an impressive range of realistic sounds. Please read this manual carefully before use and keep for future reference.
PAGE 2
Contents 1. Parts list ……………….........…………….… 2 2. Specifications ……………...........………… 2 3. Connections …..........………….……..….… 2 4. Attention ………………………….............… 3 5. USB Setting …………………..............….… 3 6. LED Status ……………………..........………4 7. Operation ………………………...........…… 4 1. Normal Mode ………................................ 5 2. Calibration Mode…..............................…. 5 3. USB Mode ………..............................…....5 8. Warranty and Service ….....................
PAGE 3
1. Parts list 1. Main unit × 1 2. Loudspeaker unit × 1 3. ESC connecting cable × 4 4. Micro USB data cable × 1 5. Power cable × 1 6. Φ 5mm white LED × 2 Φ 3mm white LED × 1 Φ 5mm red LED × 1 Φ 3mm yellow LED × 2 7. Accessory pack × 1 8. Double sided tape × 2 9. Manual 2. Specifications 1. Speaker input voltage: 6V-26V 2. Max Power: 30W 3. Loudspeaker unit size: 100 × 45 × 20mm Cable: 20cm, 2.0 JST-XH connector 4. Control Board size: 66.3 × 44 × 14.8m 3.
PAGE 4
USB up: Left: Input Channel From up to down: 1. Direction Channel 2. Throttle Channel 3. First Loudspeaker Channel 4. Second Loudspeaker Channel Right: Output Channel: From up to down: 1. Direction Channel 2. Throttle Channel 3. First Loudspeaker Channel 4. Second Loudspeaker Channel 4. Attention • Always assemble this system in accordance with this manual, ensuring that all components are mounted securely.
PAGE 5
If the file “confug.ini” is damaged, it may be edited by using the above parameters. Idle ON: When the sound system is turned on with throttle at neutral and the car is static, the control unit will see the motor at idle status and will play the engine idle sound for the selected delay period (1~9 seconds) when the idle delay function is selected. After this time the sound will turn off automatically. The sound will start again once the throttle is activated.
PAGE 6
Engine sounds produced will match the speed of the motor as set by the throttle stick. The LEDs will show the RPM status 2 x Blue and 2 x Red LEDs illuminated simultaneously indicate that maximum RPM has been reached. A short press of the Enter button will increase the sound volume, and a short press of the Esc button will to decrease the volume. The motor will switch off automatically when the throttle has returned to Neutral for 5 seconds. 2. Calibration Mode 1 .
PAGE 7
4. Sound Selection A long press on the Mode button when in normal mode will produce 2 beeps and enable sound selection. You will then hear all of the possible sounds played in sequence and select the required ones by a short press of both the Enter and ESC buttons as they are played. To confirm selection and return to normal mode a short press of the Mode button is used. 8. Warranty and Service Notwithstanding local regulations the warranty for this product is 1 year (from the date of invoice.
PAGE 8